BB Logging update (March 4th)

Quote:

---

Originally Posted by Blacky

Yes, EFILive will log multiple* Innovate devices.

The initial relaese may only support one, but it has been set up to handle mutliple devices and the firmware will eventually support more than one.

*Limited to four Wide band devices.


Regards
Paul

---

Great. That's what I'll be waiting for. I'm locked into using dual LC-1's with my setup. The bank to bank airflow differences under vacuum necessitate taking an average of both banks, as they can differ by over 1 whole AFR unit.

Quote:

---

Originally Posted by ntae

For the PLX users there is some talk over at PLX


http://www.forum.plxdevices.com/view...hp?p=6481#6481


Geoff

---

Nice work Geoff.. I'll be hitting you up to convert mine once we're out of Beta.

Quote:

---

Originally Posted by mistermike

Great. That's what I'll be waiting for. I'm locked into using dual LC-1's with my setup. The bank to bank airflow differences under vacuum necessitate taking an average of both banks, as they can differ by over 1 whole AFR unit.

---

My original post indicated we would support 4 wide band controllers simultaneously. However, for simplicity I've reduced that to 2xLC-1's or 1xLM-1 + 1xLC-1.

Regards
Paul

Quote:

---

Originally Posted by Blacky

My original post indicated we would support 4 wide band controllers simultaneously. However, for simplicity I've reduced that to 2xLC-1's or 1xLM-1 + 1xLC-1.

Regards
Paul

---

That's the ticket! I too am a victom of the lean bank tune-around

Litterally last month I threw away about 10 years worth of colleted null modem cables - gah! Every nokia or pix I worked on was shipped with them and I had a thing for collecting

Cant wait to ditch the analoge inputs, nice one guys!

Quote:

---

Originally Posted by Cougar281

Paul, will we be able to initiate fast learn on the Allison controllers without clearing taps like the PPE programmer can?

---

We are currently working on bidi controls for Allison (and other controllers). If it is possible to add that feature we will.

Regards
Paul

The allison 6 speed reading/flashing problem is fixed in the next beta release on Saturday.

Regards
Paul

FlashScan LC-1 Serial data logging video
http://www.youtube.com/watch?v=85yufIFjGuw

Note: "Error 9" displayed on FlashScan's screen is generated by the LC-1 when it detects "Supply Voltage too low".

Regards
Paul

Quote:

---

Originally Posted by Blacky

FlashScan LC-1 Serial data logging video
http://www.youtube.com/watch?v=85yufIFjGuw

Note: "Error 9" displayed on FlashScan's screen is generated by the LC-1 when it detects "Supply Voltage too low".

Regards
Paul

---

Way to go... :cheers: ...can you display EQ instead of Lambda...?

(or would I just take care of that in calc_pids.txt...?)

Joe - I think that'll be a calc_pid. If memory serves, the LC1 transmits AFR and Lambda based on the configuration stored/programed to the device. It's still a bit early in the AM, but if I'm not mistaken, the Lambda and calculated BEN should be about the same...