1 Attachment(s)
2013 ZL1 A6 Shifting issue's - Cant Datalog "EQ Ratio vs RPM"
2013 ZL1
A6 Transmission
Upper and lower Pulley set. Ported blower.
His shifting is really goofy, pulling timing where it shouldn't be. Under REALLY light throttle.
I think I know where the problem is, but I can't get EFI to datalog "RPM vs EQ Ratio".
Attachment 19611
Sorry for the lame picture. But I can get the vehicle to datalog RPM just fine (obviously). But the EQ Ratio, I can't find it anywhere amongst the PID's.
Any thoughts?