Hi,
when I connect my V2 for tuning or scanning, the dashboard does not work, AC works and cant be switched off. It is updated to the latest firmware (2.07.95) & Boot block (2.07.07)
Please help
Printable View
Hi,
when I connect my V2 for tuning or scanning, the dashboard does not work, AC works and cant be switched off. It is updated to the latest firmware (2.07.95) & Boot block (2.07.07)
Please help
All GM 2007+ cars (you can say E38 Ones)
When scanning/logging or when flashing/reading, the other modules on the CANLAN bus don't get immediate bus access and/or immediate response from the ECM, so they complain.
You may have to remove battery power and let the modules discharge, and then reconnect battery power and let the modules sync up among themselves.
I have another unit, it works perfect. By the way, when I disconnect the unit "whenever I encounter a failure" the car goes back to normal
Odd Boy, are both V2's Blue or is one a Black? Is it the same OBD-II cable from the V2?
both are blue but different cable. I can swap and get you the result today...
I connected a brand new wire, the same thing happens..... please try to help as soon as possible.