Emergency!

Flash scan box has alternating orange led's nothing happens. the thing is dead?!?!?

were you updating the V2 ?

any more info you can supply eg unit is new / been working ok just stoped

Geoff

It's been working fine. my sisters little kid was over. she might have played with the box. but there's nothing you can even do to the box is there?

I would plug the unit in & see if you can read it and try a reflash of the V2

The two alternating flashing orange LEDs indicate the firmware has been deleted or changed.

To reprogram the firmware run the program on the Start menu:
Start->All Programs->EFILive V7.5->Update FlashScan Firmware.

Click on the [Status] button and make sure the Bootblock version is 2.4.10
Then click on the [...] button and locate the firmware file:
\Program Files\EFILive\V7.5\FSProg_V2_4_70.ffw

Click the [Program] Button to reprogram the firmware. It should take about 30 seconds. The status bar may freeze during the reflash, but once the reflash is done successfully, FlashScan will Automatically reboot.

If it happens again, or if the reporgamming does not fix the problem, please take note of the circumstances under which it happened and let me know at [email protected] (include a link to this thread so I can correlate your email to this thread.)

Regards
Paul

Quote:

---

Originally Posted by Blacky

The two alternating flashing orange LEDs indicate the firmware has been deleted or changed.

To reprogram the firmware run the program on the Start menu:
Start->All Programs->EFILive V7.5->Update FlashScan Firmware.

Click on the [Status] button and make sure the Bootblock version is 2.4.10
Then click on the [...] button and locate the firmware file:
\Program Files\EFILive\V7.5\FSProg_V2_4_70.ffw

Click the [Program] Button to reprogram the firmware. It should take about 30 seconds. The status bar may freeze during the reflash, but once the reflash is done successfully, FlashScan will Automatically reboot.

If it happens again, or if the reporgamming does not fix the problem, please take note of the circumstances under which it happened and let me know at [email protected] (include a link to this thread so I can correlate your email to this thread.)

Regards
Paul

---

e-mail sent :frown:

Currently I have the 2.5.04 bootblock with 2.5.15 firmware.

Now, when I go to deadpoll to convert back to 2.4.70, it says it cannot communicate because its not in deadpoll..??? I have the 2-orange lights flashing, so I know it is in deadpoll. What can I do to fix this..?

Quote:

---

Originally Posted by 4DRSS

Currently I have the 2.5.04 bootblock with 2.5.15 firmware.

Now, when I go to deadpoll to convert back to 2.4.70, it says it cannot communicate because its not in deadpoll..??? I have the 2-orange lights flashing, so I know it is in deadpoll. What can I do to fix this..?

---

Ah I see, you've already upgraded to the BB Logging beta firmware. In that case you need to use the EFILive_Explorer.exe program to reprogram your firmware.
You will also need to use the firmware that came with the BB Logging beta software instead of the file I mentioned in my previous post.

Regards
Paul

What about me, my shit is still broke?!?!?!? Where is this EFILive_Explorer.exe?

problem fixed! looks like the bootblock got upgraded without me knowing it?!?! Damn kids! anyways just loaded the new firmware and it works just fine.