Printable View
Im looking to deliver an AutoCal to a customer but I cant right now because the P12 doesnt support BBR or BBF. I can BBL, but without being able to read or write to the PCM I cant deliver an AC.
Any idea when the EFILive crew might have a chance to implement BBR and BBF for the P12 (and BBL for the P08, should be able to do it by manually editing the Options.txt file now)?
Thanks!
P12 , the Red Headed Stepchild . :chair::chair::chair:
:chair:
Think you mean the P10, the P12 is bad but the P10 is what it is because it was only used on 1 platform with 1 engine for 4 years. The P12 was only 4 years too, but it was used on 3+ platforms and ~4 engines.
Whats weird is the P12 has BBL, just no BBR/BBF yet while the P08 has only BBR/BBF but no BBL.
Working on all 3...
Regards
Paul
Thanks Paul!Quote:
Originally Posted by Blacky
Yeah ! :jump::santa2::jump::santa1:Quote:
Originally Posted by Blacky
Any updates on these? Went to read a P12 today and V7.5 kept failing at 640kb. I can get the appropriate files to support if needed, I even pulled the Onstar and radio fuses and tried with high speed unchecked. No dice.
Usually the slow speed would work , but had it do the same thing on me a couple of times .
P12 gets no love . :bangin:
Bumpity bump, any ETA for P12 BBX stuff Paul? Know its not a high priority, just trying to see when it might be done.
Thanks for the reminder :)Quote:
Originally Posted by ScarabEpic22
Regards
Paul
So the BBx for P12 didn't make it in? Trailblazer is acting funny and wanted to "read" (Tune section, not Scan) the PCM with V2 controller no-can-do has P10 and P11 but no P12, WHY?
P12 has been in the V8 BBx software for a long time.
To add support for P12 to BBx, do this:
Right click in the blue section (of the [F5: BBX]->[F2: Scan] window) and select "Add", then right click the engine controller area and select P12.
Regards
Paul
Sorry, you said "Tune not Scan", I read that as "Scan not Tune".
Paul
I'll try again...
P12 has been in the V8 BBx software for a long time.
To add support for P12 to BBx (for reading and flashing), do this:
Right click in the blue section (of the [F5: BBX]->[F3: Tune] window) and select "Add", then right click the engine controller area and select P12.
Regards
Paul
Got it, thanks!
You tha man!
Well not getting there, seems I get a code about midway through read, $0281 No data received. The controller does the orange>blue LED flashes, then about midway through it stops instrument lights flash on and off, controller then flashes orange a few time then the error code displays.
P12 Config Files are present in EFILive Explorer, Explorer shows that there was an attempt to create a P12 (P12_0013) file in Read section, size is 1KB.
Never Mind!
Formatted the Config File and did the FlashScan P12 addition and programmed the controller again worked.
After you get that error (and before powering off FlashScan), select the option to save a trace file: [F1 Scan Tool]->[F3 Scan Options]->[F1 Save Trace File].
Then use EFILive Explorer to copy the saved trace fiel to your PC and email it to me at [email protected],or attach it to this thread.
Regards
Paul