-
AutoCal Read List
When I load Options.txt on my AutoCal it only shows the first two PCMs
then copies the second one to the 3,4,5 spot. I don't understand ?
this is what shows up
Read 1
E38
Read 2
E67
Read 3
E67
Read 4
E67
Read 5
E67
even if I select
E38
E67
LS1B
T42
T43
-
Can you please email me (support@efilive.com) your Option.txt file?
-
-
You're running the latest pre-release firmware right (2.07.06)? This issue didn't happen for me till I updated an AutoCal device this second. Once you confirm firmware for me I'll escalate it as a bug.
-
Correct. I ordered it from Justin, updated it and linked it up. I just wanted everything
to be good before I handed it off to my customer.
Thanx
-Justin
-
Thanks, I've escalated the issue mow. In the previous firmware there was only Read1 and Read2 options in Basic Menu Mode. The latest firmware has the 5 options so I'm thinking that the cause of the problem is simply going to be in the expansion of the number of Read options.
-
SOooo...... there is an Advanced Menu Mode ??
-
Yup. In the device settings under Options. There is a selection for Simple or Advanced mode. I wou;dn't recommend sending it to a customer in Advanced Mode, there is just too much more "stuff" there and you support the customer remember ;)
-
I tried Advanced mode and I got stuck in the scan tool menu <-Exit wouldn't work.
I had to reboot to get out of it.
-
The 'Exit' option in the Scan Tool menu section works fine for me in Advanced menu mode :nixweiss:.