Thanks for the info Jason, I didn't realize the PIDs did not come back after selecting a GM controller, working on a fix for it...
Regards
Paul
Printable View
Paul,
I just noticed that it also impacts your dashboard. When I changed controllers it removed PIDs I had selected to be in the graph view. Opening up the Dashboard page didn't fix it either until I had first fixed the log file (but changing controllers and re-opening the log file). Then I could select the dashboard page and get my display settings back.
BTW - I posted some of this info in the "sticky" regarding PIDs that is also in this section.
are these above mentioned issues fixed with 7.57?
With 7.5.6.170.
See the downloads page at www.efilive.com
Hi guys,
I have sent a msg to support. Just would like to know if anyone else has the issue, I have the latest V.7.5 and then I had to update the bootblock and firmware in v2 so it would connect. Ever since I have done this it asks to relicence all the pcm's I have already tuned with the current cable. (This has happened sometime ago aswell with an old update).
BUT, if I pull the tune with v8 scan and tune and then reflash with v8 it will flash without asking for licence, then for some reason I can flash again with V7.5 with no issues atleast for a few flashes then the problem persists again. I might try using my other laptop with older version for the meantime as I have 5 customers heading to the track on Friday night. Would be great if someone could help BTW it is Windows 7.
Any ideas?
Seams as though I have fixed one problem but another has raised its head .
Regards
Joel
I have version 170, trying 178 now blacky,
thanks
Joel
Blacky 178 fixed the issues, absolutely flawless on my behalf best its ran in a while. Thanks again.
Joel
I have 170 and selected programs>efilive>v7.5>check for updates, says none available even though 180 is on the website. missing a lot of pids. How do I install the update if it says one doesn't exist?
You need to download the V7.5 and V8 software installations from our web site here:
http://www.efilive.com/index.php?opt...=48&Itemid=133
Then you need to double click on the downloaded files to install them.
Make sure you install both V7.5 and V8 and that you use the V8 EFILive_HAPI software to update the firmware in your FlashScan device.
In the previous version release the auto-update caused problems with existing installations.
The auto-update has been switched off until we can fix it and verify that it works correctly.
Regards
Paul