Printable View
I wasn't sure how to search exactly for what I need!.
I have a data log, which I opened my tune to see which parts of the Main Inj I was using during normal driving.
In all my logs(WOT, and normal driving), for this tune, It only logs my PW in the highest Fuel Pressure column, even though fuel pressure is not that high.
Is this normal? I also switched the log file to read in Mpa to see if that helped, but didn't
Jason
Are you selecting the correct fuel pressure?
I thought that at first, because I logged in psi, not mpa. But it also had the PID's selected for MPA, upon switching the log, it still showed in the highest column when linked to the tune.
I will have to try to log with mpa on the dash and see what happens.
I would change it to MPA and desidered fuel pressure
Odd thing is, I have the pids selected for desired and actual already in psi and map, so they were logged. I will try to change it to mpa for the dashboard and see what happens
You are not logging the correct pid. Look at what is in parenthesis in tune tool. Find that pid in scan tool. Should be good to go.