cant link scan tool to tune tool?

I have tried to "link" scan tool to tune tool. I used 2 different trucks and 2 different v2's. Has this been implemented?
Using this method always made it easy for me to reference my logs to my actual tune.


Here is exactly what im talking about.
http://forum.efilive.com/showthread....l-Data-Logging

Check:
- scantool must show same units as the axis on the tunetool;
- checkmark pid linking in tunetool options;
- log the same pid as mentioned on the axis in the tunetool.

Quote:

---

Originally Posted by joecar

Check:
- scantool must show same units as the axis on the tunetool;
- checkmark pid linking in tunetool options;
- log the same pid as mentioned on the axis in the tunetool.

---

for some reason my column and cells do not show pid listings only on 6.7 tunes. i double checked on duramax and 5.9 tunes that the pids still list themselves. just double checked I do have "highlight scan tool selection in tuning tool maps" selected.

Quote:

---

Originally Posted by hpi_jeep

for some reason my column and cells do not show pid listings only on 6.7 tunes. i double checked on duramax and 5.9 tunes that the pids still list themselves. just double checked I do have "highlight scan tool selection in tuning tool maps" selected.

---

You also have to edit the calc_link.txt file (or otherwise copy it) as detailed in the thread you linked.

post #56 download fixed it for me. thank you very much!

ok, cool :cheers: