Ah, doesn't mean he will have any more luck than me Tony.
Printable View
Ah, doesn't mean he will have any more luck than me Tony.
with PPEI releasing T87 tuning can we use the beta update to flash and read the T87 or do we just have to buy the built tune from PPEI? we must be able to flash it now atleast?
I think flashing was always possible, no editing was available and is still not available.
I assume a T87 locking patch was in that update ??
Yup, no mapping at all for T87 and no pressure controls mapped for either.........so yes, the only choice is buy a locked file from Kory, he is the only one that even has any tables mapped, EFI-Live does not yet, they did not have a chance to get back to A50 or even start T87 yet.
HP Tuners have the T87 mapped out except for line pressure and shift times. I am not 100% sold on all the line pressure hype. Other than burnt tcc clutches how many 6 speed Allison do you see in limp mode. They do a good job protecting themselves. The ecm is in pretty good control of telling the tcm what to do as far as torque goes. I would be more happy being able to adjust shift times than line pressure.
T87 reading and flashing has been in the software for a long time (since late 2014 to be exact).
We also posted in the beta section a while ago some 'basic' mapping for the T87/Allison combination, but no pressure controls. It has never been included in a public release because the feedback was that it just wasn't comprehensive enough to be useful.