DTC report from V8 Log file?

Can someone tell me how to get the dtc report from a saved v8 log file? Stupid me flashed the truck before I read out the dtc but I do have it setup to save dtc upon saving a log file. I exported the log to a .CSV file but the data is kind of scrambled.. I do know their are some dtc. It just showed up kinda scrambled like the picture below. What should I be opening the .CSV file with? Am I on the right path. Will attach log too. https://uploads.tapatalk-cdn.com/201...eae56c992e.jpg

Sent from my moto z3 using Tapatalk

Attachment 22995

Ok. I found the correct format to view the data. I do not see any dtc though.

Sent from my moto z3 using Tapatalk

Anybody. Is this possible?

Sent from my moto z3 using Tapatalk

There are no DTCs stored in that log file. Even if there were, when you export logged dat to a *.csv file only the PID data is exported, not all the other meta data such as DTCs.
To view DTCs saved in a *.pld logged data file, use the drop down arrow on the [Config] button at the bottom of the scan tool window and select the option "Display/Change Log File Information", then select the [DTCs] tab page. (Or use the hotkey Ctrl+I)

Regards
Paul

That's weird their are none. This is a competition truck that has several random dtc as I do not have them shut off in the tune I don't think. I'll double check they are reporting correctly tomorrow with another saved log.. This engine is standalone setup that only only uses a a few sensors.

Sent from my moto z3 using Tapatalk

Dtc are reporting correctly. Thanks for your help Paul


Sent from my moto z3 using Tapatalk