Stalling Issue - Standard Cam

Just wondering if anyone can help me on a issue I am having, Car is a VZ SS LS1 A4, all stock apart from CAI and Exhaust. Have been doling the CALC.VET but for some reason when in gear and apply load with only a little throttle when the rpm comes down it fully drops and stalls out the engine? Haven't changed any idle conditions, only fiddled with the torque limiting stuff in gearbox etc to allow burnouts etc. Need advice as its holding me back.

Post tune file and log file.

Also, compare with stock tune just in case something else was inadvertently changed...

Probably have to look at the idle air, increase or decrease it and see what difference it makes.

Joe, Here is a log of the Idle and Stall PIDS are related to IAC and Throttle Cracker, Other log is just the Driving Log.