LWM Calibration files

I downloaded my stock 2.8 LWM file and I notice I don't have as many calibrations as I've seen say on a 6.6 Duramax or what not...
I.e. There's no EGR calibration folder / table.
then only place i see that is in DTC, that if i wanted to say control the function's of the EGR valve.
Or say the DPF settings tables


pic for attention

Attachment 24030

There is no emissions control parameters or tables for these.

Quote:

---

Originally Posted by GMPX

There is no emissions control parameters or tables for these.

---

Ahhh i gotcha so out of curiosity …. I have a tune , and emissions / egr/ dpf / amongst other shit is included in the tune , i load it it on with autocal / what not … how is it that that tune was able to be built if these parameters / tables aren’t available for these trucks ?

Hi, tuners have other software to edit raw file, e.g. winols , or create their own CAX file so you can add your own tables , efilive is use as a downloader at that point

Quote:

---

Originally Posted by modpcm

Hi, tuners have other software to edit raw file, e.g. winols , or create their own CAX file so you can add your own tables , efilive is use as a downloader at that point

---

Ohhhhhhhhhhh ok ok