Help to make Calc PIDs in V8

Show 40 post(s) from this thread on one page
Page 1 of 2 12 Last
• May 23rd, 2017
wesam
Help to make Calc PIDs in V8
Hello EFI Live team
I hope there will be a tutorial to help make Calculated PIDs in V8

• June 15th, 2017
joecar
I thought the was a thread which briefly showed how, but I can't find it :doh:I'll look for it.

In the meantime see attached example file from my folder C:\Users\joecar\Documents\EFILive\V8\Config (remove the .txt from the end of the filename).

Code:

```[Groups] GLOBAL=Global Functions WO2SER=Wide Band O2 Sensors (Serial-Comms) WO2CAN=Wide Band O2 Sensors (CAN-bus) [GLOBAL] FUNCTION="Global Functions",factor,0 [GLOBAL.FUNCTION] 0=|-- GLOBAL.FUNCTION 1=|function iff(x,y,z) 2=|if (x) then return y else return z end 3=|end [WO2SER] WO2BEN="Base Efficiency Numerator (Serial-Comms)(Dynamically-Leanest)",factor,3 [WO2SER.WO2BEN] 0=|-- WO2SER.WO2BEN 1=|return iff(pid("WO2LAM1")>pid("WO2LAM2"),pid("WO2LAM1"),pid("WO2LAM2"))*pid("EQIVRATIO") [WO2CAN] WO2BEN="Base Efficiency Numerator (CAN-bus)(Dynamically-Leanest)",factor,3 [WO2CAN.WO2BEN] 0=|-- WO2CAN.WO2BEN 1=|return iff(pid("WO2S11")>pid("WO2S21"),pid("WO2S11"),pid("WO2S21"))/pid("EQ_RAT")```
• July 11th, 2017
gixxer92
Sorry for my ignorance Joe. I just looked at the thread again and realized there was an attachment!
Thank-you!
• July 11th, 2017
Blacky
Why not just use the built in Calc PIDs editor?

In the Scan Window, click the drop down arrow on the [Options] button and select "Calculated PIDs" (or just use the Ctrl+K hot key).

Calc PIDs in data logs are updated instantly (when you close the calc pids editor, or click [Apply]) , no need to try and understand/edit the calc pid *.ini data files.

Regards
Paul
• July 11th, 2017
Blacky
You can also export/import calculated PID groups to easily share your own calc PIDs with other users. Just right click on the group's icon and select import or export.

Regards
Paul
• July 11th, 2017
joecar
Quote:

Originally Posted by Blacky
Why not just use the built in Calc PIDs editor?

In the Scan Window, click the drop down arrow on the [Options] button and select "Calculated PIDs" (or just use the Ctrl+K hot key).

Calc PIDs in data logs are updated instantly (when you close the calc pids editor, or click [Apply]) , no need to try and understand/edit the calc pid *.ini data files.

Regards
Paul

Paul, you meant the down arrow on the [Config] button.
• July 12th, 2017
Blacky
Quote:

Originally Posted by joecar
Paul, you meant the down arrow on the [Config] button.

Yes, I'm getting too old for this...
Regards
Paul
• March 8th, 2018
Gelf VXR
Hi Joe, which folder does this attachment reside, i put it in C:\Users\Andy\Documents\EFILive\V8\Config. I cant see the pids when i open V8 scan. I can manage calc pids in V7.5, need a push in the right direction :)
• March 8th, 2018
joecar
Yes, the file UserCalculatedPids.ini correctly resides in that folder C:\Users\Andy\Documents\EFILive\V8\Config

When you open V8 S&T, click Scan, look over in the RH pane (yellow) Available PIDs, expand Calculated, you should see your pids here.
• March 8th, 2018
joecar
Post your UserCalculatedPids.ini file here, let me look in it...
Show 40 post(s) from this thread on one page
Page 1 of 2 12 Last