Table (B9120) has all 1's, is this table active or turned off elsewhere with reference to table (B0909)?
Thanks,
Michael
Printable View
Table (B9120) has all 1's, is this table active or turned off elsewhere with reference to table (B0909)?
Thanks,
Michael
B9127 references maximum #2 of 5 mm3 stock. B0909 is active with 1 mm
I'm not sure why this posted weird. B9127 references #2 pilot at Max of 5 mm3. B9120 is active with a minimum of 1 mm3. As pilot 3 is active b9130 at 0 mm3 and a Max of b9137 5 mm3. We don't have a pulse table to play with that these reference to.Quote:
Originally Posted by 85c20lb7
Sent from my 2PS64 using Tapatalk
If pilot #2 is active, meaning both pilot #1 and #2 are active, would timing base C be the table used?
Or does "active" mean actively pulsing and I'm using Timing base B because there is no activity on pilot #2?
What is keeping Pilot #2 from pulsing?
b0909 Timing base B:
This is the base start of injection (injection timing) table with just Pilot 1 active, this table is based on fuel delivery per stroke (mm3) and RPM.
This table is used most of the time during normal running.
B0910 Timing base C:
This is the base start of injection (injection timing) table with both Pilot 1 active & Pilot 2 active, this table is based on fuel delivery per stroke (mm3) and RPM.
Michael.
Just my 2 cents worth, but in logging, I've never found any set of circumstances for which pilot 2 or 3 becomes active. Has anyone else?
[QUOTE=VegasDMAX;245453]Just my 2 cents worth, but in logging, I've never found any set of circumstances for which pilot 2 or 3 becomes active. Has anyone else?[/QUOTE
I have not, but only have about 10 hours logged.