no brother, even if I request new number it uses the number that is originally assigned by efilive team after completing the update!!!! Beautiful, isn't it???
Printable View
2006 Commodore
08:29:39.716: Scanning for EFILive FlashScan V2 HAPI
08:29:39.747: Autodetect interface ...
08:29:40.028: Interface firmware version: 2.7.3
08:29:40.043: Connection to [FSV2] interface is OK
08:29:40.293: Interface firmware model: FSV2
08:29:40.324: Interface firmware version: 2.7.3
08:29:40.355: Interface firmware date: Nov 18, 2010
08:29:40.386: FlashScan serial number: 003782291113
08:29:40.418: FlashScan license number: 003782291113
08:29:40.464: Disconnecting ...
08:29:41.088: CAN-VPW Bridge Deactivated
08:29:41.104: Disconnected
08:29:41.806: Scanning for EFILive FlashScan V2 HAPI
08:29:41.837: Autodetect interface ...
08:29:42.134: Interface firmware version: 2.7.3
08:29:42.165: Connection to [FSV2] interface is OK
08:29:42.212: CAN-VPW Bridge Activated
08:29:42.290: Current protocol set to: "SAE J1850 VPW"
08:29:42.321: Autodetect PCM...
08:29:42.586: Connection to PCM is OK
08:29:42.617: Autodetect TCM...
Um, Suhail what are you trying to show here? You need to manually update your firmware still, you have the November 18th version loaded now not the November 22nd.
Touch the wood, u still remember.....
You offered me a good help on that day, I am a good student "never forget" from the first seen.........
Thanks again
Suhail,
Call me this afternoon to upgrade the firmware if you still have the issue
Pass-thru reading would NOT work on an LBZ that I attempted to read this afternoon. However, it worked fine on my LS1.
Is it because I was trying to use 7.5 to read the ECM? Do I need to use V8 or scan and tune or what? Need to make a few tweaks to a buddys LBZ that I previously tuned and I am not currently able to. Thanks.
did apply the latest firmware update?