Printable View
Can anyone tell me what the cable connections are for the LC-1 Wideband Sensor (see link): http://www.eneily.net/index_files/LC-1.pdf
I have downloaded the manual form the Innovate website but I can't seem to align the wiring diagram with picture on the link.
Thanks.
Did you check the LC-1 Tutorial (available from the Help menu of both the Scan and Tune tools)? From memory it talks about wiring as well as setting up for EFILive etc.
In your pic...
A = wiring to the O2 sensor
B = Serial IN
C = wiring for: power (red, blue), analog signals (yellow, brown, green), calibration/LED (black, white)
D = Serial OUT
Cheers dude.Quote:
Originally Posted by joecar
No worries, mate. :cheers:Quote:
Originally Posted by NAH
Finally completed the install. Spent a long time planning how the wiring would work. Split the 7-core cable to provide a 4-core connection to the original O2 sensor connection from the loom & then took 3-cores into the car interior through the gear level cover for the EFi Box & Calibration connections.
Hardest part was sourcing the Deplhi connectors. Ledfoote in the US sorted that (thanks chaps) & away we were. They are much easier to assemle than the Tyco ones & the tool is £££'s cheaper too.
Worked first time (once sorted the PID file etc). Will post a PDF of the wiring arrangement when I've finished it.
Good job. :cheers:
OK, here is the link for the wiring diagram for the LC-1 on a 2004 Monaro
http://www.eneily.net/index_files/LC...%20Diagram.pdf
Looks about right.
Very nice images/pdf. :cheers: