Printable View
Hey guys. I’m looking for some help tuning my truck for my water/meth kit. I have a black bear tune in it but they can’t seem to tune for the water/meth. I’ve looked all over for help but can’t find it or anyone that can build a tune for it. Please let me kno if anyone can help. Thanks!
I tune meth setups all the time, have a 1100rwhp z06 with meth on dyno right now. There is alot to tuning it, nozzle placement, nozzle size, and the big one is what type of controller you have. We dont sell or use snow kits so I know how programmable there controller is. How much boost are you running and what are your IAT's currently?
I have a snow performance stage 2 kit. It runs off my MAF volts. I can program at what time it kicks on & when it’s at full output. That’s it. I don’t have any boost currently. I can send u a log file for the IATs. I don’t know them off hand. If you could help me out with running I would greatly appreciate it!!!!!!
These are my stock files & modded. Keep in mind I did all this myself & am very new to tuning these trucks so if you can help in any way I’d appreciate it. I am currently running a black bear tune but it’s locked so you can’t view it. The black bear tune doesn’t really give me much so I’d like to build something myself. Like I said any help is much appreciated.
Stock Tunes/Logs
Attachment 19206
Attachment 19209
Attachment 19207
Modded Tunes/Logs
Attachment 19205
Attachment 19208
Attachment 19210
Why are you wanting to run meth NA? In both those logs the IATS were not high at all. I dont see any gains running meth with your mods in your signature. The other 2 issues are I wont tune a granatelli maf and the way your meth is being activated off the maf. Seen to many issues with both of those so I dont mess with them, not worth the headache when doing remote tuning all day. If you are new tuning then I highly suggest NOT running meth there is alot to running it correctly. Without having your truck on a dyno you could easily lose hp spraying meth not knowing what your doing.
Alky-Control
MAP controller (so it sees boost when they spray). I like this so as to not risk contamination of the MAF with meth.
Use a "break-out" kit to get the IAT out of the MAF
Nozzle placement is key along with size of nozzles. People don't realize a "little goes a long way" with a dual nozzle meth kit.