E92 pcm and class 2 gauges is this possible?

Can any of the E92 or SIDI computers talk class 2 data? I'd like to run one of these in a older Colorado canyon, with class 2 gauges.

No, the E67 was the last ECM GM put class 2 in to, it's long gone.

Quote:

---

Originally Posted by GMPX

No, the E67 was the last ECM GM put class 2 in to, it's long gone.

---

So the hardware isn't in the controller?

What would happen if I connected the can from the e92 to a e67, would the class 2 on the e67, then output the speedo, rpm and temp via class 2 from the e67? I doubt it?

Quote:

---

Originally Posted by 04colyZQ8

So the hardware isn't in the controller?

---

No.

Quote:

---

Originally Posted by 04colyZQ8

What would happen if I connected the can from the e92 to a e67, would the class 2 on the e67, then output the speedo, rpm and temp via class 2 from the e67?

---

No.


You would have to design and build your own Class 2 <--> CAN gateway/translator module.