Hello, I have a 96 c1500 and I'm throwing in my 350 vortec in there. I have the 0411 pcm, wanting to know what's all needed to make this work. Thanks!
Printable View
Hello, I have a 96 c1500 and I'm throwing in my 350 vortec in there. I have the 0411 pcm, wanting to know what's all needed to make this work. Thanks!
Since I noticed the post finally went through, let me tell you the story on this. You can disregard this portion if you don't to read it.
Bought the truck for 600 dollars, from my fiance friend who is scared of driving it due to miles (250k). Got it going and running great. Has a 305 vortec v8 and a 700r4 electronic trans (same as 4l60e). Yesterday, it died on my driveway. Missing like hell. I also have my 65k mile 350 vortec I snagged for 600 with the 4x4 trans that I'm not using. The engine will be used. I also snagged a 700r4 trans from the wreckers for 150 that was rebuilt by jaspers. Anyways, I used the fuel spider, dizzy, rotor, wires, plufs, new fuel pump and filter, and ignition module and 5he engine still ran like crap.....until the real reason pops out. I was missing water out the exhaust, my radiator flushed out 6 gallons of water and my oil became coffee colored.
Needless to say....its time lol.
So I'm currently collecting parts, and upgrading too. I have the 350 vortec, marine intake with injectors, 0411 pcm from a 2002 express van with the vortec 350, hooker headers from a 94 lt1 camaro, and the 700r4 trans. So im excited to give her a nice heart and to keep miles off my 2011 550i that I have to daily for abit until this is done.
I read a lot about the 0411 pcm and it's capabilities, sounds brass so hopefully I get support of this dated mod.
Check this site --> http://www.gmtruckcentral.com/articles/12200411.html
Then PM Lextech for the wiring schematic/pinout list. It's easier than it looks. Trust meh!
Thank you SS2win I have pmed lextech and awaiting his response. Hopefully it's as easy as it sounds. I'm sure the hardest part is getting the 411 tuned and code out vats and such.
he's got a starter tune for you as well. the job is intimidating at first but once you get a few wires moved it rolls along pretty smoothly. read the spreadsheet twice. do one wire at a time. be SURE you move them to the right position and it's a breeze.
Sweet, this should be exciting. This will give the truck a new meaning haha. The marine intake will help too along with my hooker headers. It might not fit though so I may get the proper ones. I grabbed the headers from the junkyard from a 94 camaro z28 with the lt1.
Looks like I'll be starting to tear out the old 305 out the truck soon. My upper intake should be here Monday and will tear down the 350 for a refresh.
Does the pm works Here? I pmed lextech about the pinouts, hopefully he received them.
I understand since it's thanksgiving, I'm sure a lot of people are out lol...
Anyone?
pm's will be available to you after you do 10 thread posts.
Ahhh ok I wasn't aware of this restriction. Sorry about that, I'll get that taken care of.
I'm just excited since I will finally have some days off to go ahead and tear my truck apart. I'm not going to do anything crazy, but will like it to perform better than what it was before. And with the marine intake, that will be a cheery on top haha. Am I allowed to post pictures and a build thread or is that will be taken elsewhere since this is strictly a tuning forum?
Try pm's now.
There is a Lounge section in the forum, please feel free to post build pics in there...
https://forum.efilive.com/forumdisplay.php?8-Lounge
we need more build threads... :thumb_yello:
+1 I like to see what people have been doing :cheers:
Any updates? Thinking about an 0411 Swap VS a 6.2L in my '99 CCSB Daily Driver!
Ok, finally I'm back haha. Sorry, due to job swaps and extremely busy schedule that I haven't came across the project until Christmas time. I did the project and completed it in three days, starting it for the first time in Christmas day. Ran great, only pull one code of running too rich. Will need a tune soon from blackbear.
I will continue the story when I'm accessible to a computer.
A lot of stuff happened while doing this project.
Also....since photobucket was being a greedy hog now charging to post pics, what other sites or hosts you can use to post pics? I don't have much due to time crunch, but I do like to share some ideas on this build.
You can upload your pics here.
In need of a spreadsheet for a 1997 k1500 4l80e 383 stroker to 0411 pcm
Finally got around to installing the pcm I got from blackbear thanks a lot to lextech for the spreadsheet no codes so far and what a difference does it make should have done this a long time ago
I just received my V3 today. I have a long learning curve to go, but am looking forward to it. swapping out a 1999 2500 black box to a 2002 express van 0411. I pm'ed lextec , nicely I may add, but haven't received a reply as of yet. Someone said I need to have 10 posts to PM, but I noticed you only have 4. Maybe it aint so????