CSP5 Switch

I have been running a CSP5 Switch on my 2012 Ram Deleted ( EFI Live ). Switch is in # 2 position
I unplugged it to install a New Tune in the ECU. If I don't plug the Switch back in , will it know that I was on the # 2 position previously

Thx

Sent from my SM-A520W using Tapatalk

No the position is forgotten when the ECM is programmed.
Tunes can be set up to default to a particular tune after the ECM is programmed though.

Thx

Sent from my SM-A520W using Tapatalk