Autocal Simple & Advanced Mode

I am trying to program autocal with advance menu but the fields are dimmed!, and isn't there a user guide showing what is exactly under the advanced mode and how it is structured.

What does Full 1 full 2 ..etc mean? how is it different from Prog 1...etc??

Also, when selecting Efilive Scan and Tune> Devices? I get a menu with several options..now where can I find the explanation for each sub menu and the options and what do they mean.

Thanks

any answer

I can change my Autocal to the alternate menu by:

plugging my Autocal in to the USB port
opening V8 Scan and Tune
Clicking the Autocal icon to connect
choosing F6 Devices,
Choosing F5 Options
Checking the wanted meny type at the top
Clicking Program
Rebooting the Autocal by unplugging it.

If you hover the mouse cursor over the input fields on those pages you will get a bit of help for each option. Since most of the choices seem reasonably clear, which ones exactly didn't you understand and I'll try to explain them better.

Ira

Quote:

---

Originally Posted by Ira

I can change my Autocal to the alternate menu by:

plugging my Autocal in to the USB port
opening V8 Scan and Tune
Clicking the Autocal icon to connect
choosing F6 Devices,
Choosing F5 Options
Checking the wanted meny type at the top
Clicking Program
Rebooting the Autocal by unplugging it.

If you hover the mouse cursor over the input fields on those pages you will get a bit of help for each option. Since most of the choices seem reasonably clear, which ones exactly didn't you understand and I'll try to explain them better.

Ira

---

I will try and see..Many thanks