Current Gear and Oil Temp

Printable View

June 7th, 2009
kwhiteside

Current Gear and Oil Temp

Oil Temp is not selectable. Would like to monitor this but how do you get it in? It's built into the factory cars so I would think you wouldn't need an external feed to monitor this.

I searched around and found a txt formula for calculated box ratio that let me select it in v7.5 after entering it into calc_pids.txt, but how would I get that into b8.1 bbl?

#Units Low High Fmt Expression
#------------ ------------- ------------- ---- --------------------------------------------------------------
*CLC-00-062
None -4.0 4.0 .3 "{SAE.RPM} / {SAE.VSS.mph} / 336.135 / 3.29 * 24.86"

#Code PRN SLOT Units System Description
#------------------------- ---- ------------ ---------------- ---------------- ------------------------------------------
CALC.RATIO F062 CLC-00-062 "None" Calculated "Calculated Box Ratio"

Thanks in advance, Ken . . .
June 8th, 2009
bballer182

Calc pids go in 7.5 for viewing after you log with BBL. that expression goes in the calc.pids.txt file.
June 8th, 2009
kwhiteside

Quote:

Originally Posted by bballer182

Calc pids go in 7.5 for viewing after you log with BBL. that expression goes in the calc.pids.txt file.

Sure enough, the BBL session has the data after selecting the ratio PID. Data doesn't appear to be useful though. Often after shifing into second, the ratio still shows 1.xxx and 3rd still shows 2.xxx.

Strange it doesn't have a built in way to log gears for a manual.
June 8th, 2009
kwhiteside

Anybody know how to get the Oil Temp logged??
June 8th, 2009
joecar

Which vehicle/year/model...?

For manual transmission, there is no way to know the current gear nor the ratio.
June 8th, 2009
kwhiteside

2001 Corvette Z06 , Manual
June 14th, 2009
Highlander

Quote:

Originally Posted by joecar

Which vehicle/year/model...?

For manual transmission, there is no way to know the current gear nor the ratio.

I am going to make a calculated PID for it...

it shouldn't be too hard...

mph/rpm = xx if whatever whatever output 1st 2nd 3rd... that is the logic...
June 20th, 2009
Jasondt2001

Quote:

Originally Posted by bballer182

Calc pids go in 7.5 for viewing after you log with BBL. that expression goes in the calc.pids.txt file.

Just trying to make sure I understand...
Calc.pid's AREN'T Viewable in the V2 while BBL'ing? They are only viewable after the log has been made and saved and loaded into my laptop for later viewing?
June 21st, 2009
joecar

Quote:

Originally Posted by Jasondt2001

Just trying to make sure I understand...
Calc.pid's AREN'T Viewable in the V2 while BBL'ing? They are only viewable after the log has been made and saved and loaded into my laptop for later viewing?

That is correct.