Printable View
i have EFI live full v2, i also have a 2006 gmc yukon xl denali, the oil pressure gauge pegs to 80 when i turn it on, i want to watch the oil pressure using efi live if possible, to compare gauge reading and actual output from sensor, is this possible?
any help appreciated, just got the vehicle in question
The oil pressure gauge pegging during engine start is a function of the IPC...
EFILive can edit only the PCM/ECM/TCM and not any of the other vehicle modules.
I didn't want to edit anything, just watch the real time oil pressure reading coming from the sensor, to make sure its the gauge before I send the IPC out.
I'm just thinking if the oil pressure sending unit is bad, it could be sending a reading of 80 lbs right when its turned out. My logic may not be correct, but that's what I'm thinking,