Isky triple 12. 212/212/112 .585 lift. Ok I will give that a try. thanks so much for everyones help. I appreciate it so much i have been battling this for almost 6mos.
Sent from my iPhone using Tapatalk
Printable View
Isky triple 12. 212/212/112 .585 lift. Ok I will give that a try. thanks so much for everyones help. I appreciate it so much i have been battling this for almost 6mos.
Sent from my iPhone using Tapatalk
Had a few mins spare time this morning so i tried zeroing out that table and smoothing out the ve table. Still will not maintain. Starts around 14.0 and drops to about 12.2 at the end of the log. Attachment 20082 here is the latest log
Anybody have any other ideas.
Sent from my iPhone using Tapatalk
No one???
Sent from my iPhone using Tapatalk
Here is the tune for the log file Joe.Attachment 20119
Anyone?
Sent from my iPhone using Tapatalk
I looked at your log file, and I could not see anything in the tune file that would directly cause what you're seeing.
Possible cause: are the injector tables correct (B3701, B4003, B4004, B4005, B4006, B9021)...?
Try putting negative values in B4005 (say -1.5 ms) and take another log.
I am fairly sure the injector data is correct as it is from a known good tune that isn't having this problem. I will give the -1.5 a try. Hopefully that helps cause I am totally out of ideas
Sent from my iPhone using Tapatalk
Tried the new tune this morning it wouldnt run at -1.5. Finally got it down to a -.4 and it fires right up at 15.6 afr but still the same thing once warm its in the lower 13s. Do i need to add airflow above 150*f or is this just something i have to live with running open loop speed density
Sent from my iPhone using Tapatalk