BBL help

Firmware 2.07.14
EFIlive scan and tune 8.2.1 build 160

I Update a few days ago and now the BBL wont log all my pids im show in the logging screen. Here is a qick snap shot of the sceen and the log file. Any ideas?

http://i241.photobucket.com/albums/f...blogandpid.jpg

Did you program those pids into your V2 after you updated the firmware...?

Download and install V7/V8 from here Release-Candidate-2-Aug-19-2011

then using V8 EFLive Explorer do this:
- goto thew Firmware tab,
- update the bootblock to 2.07.03,
- update the firmware to 2.07.21,
- exit from EE.

then using V8 Scan & Tune do this:
- goto the BBx tab,
- goto the Scan subtab,
- click Read,
- click Save (and if asked specify filename Options.txt),
- click the down arrow on the Program button and select Program All Required Data (Slower),
- exit from the subtab and exit from S&T.

Quote:

---

Originally Posted by joecar

Did you program those pids into your V2 after you updated the firmware...?

---

YES I open S & T after update and then Program All Required Data (Slower) to my V2. I think this what you are asking.

Quote:

---

Originally Posted by joecar

Download and install V7/V8 from here Release-Candidate-2-Aug-19-2011

then using V8 EFLive Explorer do this:
- goto thew Firmware tab,
- update the bootblock to 2.07.03,
- update the firmware to 2.07.21,
- exit from EE.

then using V8 Scan & Tune do this:
- goto the BBx tab,
- goto the Scan subtab,
- click Read,
- click Save (and if asked specify filename Options.txt),
- click the down arrow on the Program button and select Program All Required Data (Slower),
- exit from the subtab and exit from S&T.

---

I try it out Thanks

Updated instructions:

Quote:

---

Originally Posted by joecar

Download and install V7/V8...

then using V8 EFLive Explorer do this:
- goto thew Firmware tab,
- update the bootblock to 2.07.03,
- update the firmware to 2.07.21,
- exit from EE.

then using V8 Scan & Tune do this:
- goto the BBx tab,
- goto the Scan subtab,
- click Read,
- click Save (and if asked specify filename Options.txt),
- click the down arrow on the Program button and select Format Config File System,
- click the down arrow on the Program button and select Program All Required Data (Slower),
- exit from the subtab and exit from S&T.

Also, using V8 Scan & Tune, do the same on the Devices subtab (filename is Settings.dat).

---

Quote:

---

Originally Posted by joecar

Updated instructions:

---

Joecar,
The update worked. Thanks for the help.

Cool :cheers: glad you got it sorted.