Installed lift pump and now I am gettin lots of smoke.

I finally installed my Fass 150 on my 07 and now my tunes I worked hard on not to smoke now smoke a lot. It happens when at cruising speed when I go to ease into the throttle; I look in the mirror and holy crap. It's also when I start off from a stop too. Do I need to retard main timing more at cruising speed? Do I need to increase the rail pressure and decrease fuel. I know its delivering a lot more fuel to the cp3 now. The cp3 is all stock and so are my injectors. I have been playin hell gettin my big single to light quick and stay lit. I have the pilot time and quantity set where it started working with no smoke EGTs in the 900-950 range and low main timing. I'm just kind of scratchin my head right now of where I need to start. I would appreciate any help.

Do you not have a low pressure gauge? what is the cp3 reading?

Well turns out I get no smoke if I don't use the CSP5 switch. I installed the switch before the Fass. For some reason the CSP5 I makin my tunes smoke. I unplugged it and have tried all my regular tunes I made and they run great. Scratchin my head. Is there somethin I'm doin wrong with my switch? I data logged (finally figured out was Les was talkin about with the new PIDs) sorry Les! Was tryin to log the new PIDs without the csp5.

Don't worry my truck does that with the csp5 tune i wrote also. If you want to send me your tune to look at ill look at. ( I'm not a pro but i have learned a bunch ).

I have gauges for almost everything important in my truck so I can look at them while driving and let you know what the gauges are reading. I don't have a pump so I can't help you there.

What's your email. My switch ran fine without the pump lol. I put the pump on and holy crap the smoke. PM me your email.

pm sent.