98 to 99 Fuel Segment swap gauge output table

I've done a fuel segment swap to run a 99+ PCM in my car. I am trying to get the fuel gauge to work. Question though what are you guys using in the Gauge Output vs Level table and Primary Volume vs Level table? You guys using the 98 table? 99+ table? The express van table? Stumped here

There are more than a few threads on upgrading from an LS1-A PCM to and LS1-B PCM. Perhaps try a search of the Forum ... probably what you need is already here.

Below is one of the threads I found using the search function ...

http://forum.efilive.com/showthread....ght=fuel+gauge


Regards,
Taz

Quote:

---

Originally Posted by Taz

There are more than a few threads on upgrading from an LS1-A PCM to and LS1-B PCM. Perhaps try a search of the Forum ... probably what you need is already here.

Below is one of the threads I found using the search function ...

http://forum.efilive.com/showthread....ght=fuel+gauge


Regards,
Taz

---

Actually that information you posted I have already done and isn't even the topic of my post.

Thanks again

The point of my post was to take a look for the material yourself ... often faster than waiting for someone to post up.

You are welcome by the way ...


Regards,
Taz

EDIT: Received your message - only the moderator (Joecar) can lock threads ... I was trying to be helpful ... unfortunate that you seemed to have misinterpreted this ...