Newbie with $050B Error

Printable View

February 26th, 2011
razorback_jd

Newbie with $050B Error

First off, I'm a newbie... so I apologize upfront if I'm using the wrong terms! I recently bought/received shipment of a new AutoCal from a tuner. I'm struggling with a Error $050B code "Script file not supported by current firmware version"... when I attempt to read the factory settings from my vehicle (2008 GMC Denali 6.2L). I'm running all the current software/firmware from what i can tell from reading up on this forum....

EFILive Version 8.1.2 Build 142
Autocal V2 boot block version 2.07.01
Autocal V2 firmware version 2.07.06

I found the posting below... and followed Blacky's direction regarding update of the *.obj files... both "manually" using the EFI explorer and semi-automatically using the scan & tune app... still NO LUCK, same error.

http://forum.efilive.com/showthread....rror-code-050B

I've attached the "options.txt" file that the tuner directions indicated should be used.

What the heck am I doing wrong here???

Signed,
Frustrated Okie
February 26th, 2011
Tordne

Support for AutoCal is provided directly by your tuner. The simple reason for this is that you have engaged the tuner to provide you with a tuning service, the AutoCal is simply the method for delivery of that service. As part of the service the AutoCal device will have been specifically configured by the tuner and if we give you advise which changes that configuration in any way it may cause a subsequent issue for delivery of this service.

Your issue should be simply resolved in consultation with the tuner and relates to the firmware and versions of the script files on your AutoCal device being out of sync with one another.
February 27th, 2011
razorback_jd

Understood. I will work with the tuner.
February 27th, 2011
L31Sleeper

Quote:

Originally Posted by Tordne

Support for AutoCal is provided directly by your tuner. The simple reason for this is that you have engaged the tuner to provide you with a tuning service, the AutoCal is simply the method for delivery of that service. As part of the service the AutoCal device will have been specifically configured by the tuner and if we give you advise which changes that configuration in any way it may cause a subsequent issue for delivery of this service.

Your issue should be simply resolved in consultation with the tuner and relates to the firmware and versions of the script files on your AutoCal device being out of sync with one another.

I never thought about it like that.