FI LS3 Corvette not passing readiness checks

Hi all,
The short version...I have a supercharged 08 (LS3) Corvette that I had tuned by a "professional". The car runs fine, but I'm having trouble getting it to pass the readiness checks for emissions. Seems the rear O2's have been tuned out.

Since having it tuned, I've moved roughly 15 hours drive away and having it retuned isn't an option. Not only the long drive, but discovered my tuner had done some shady things so I refuse to go back. (locking my ECM, selling me EFIL and wideband O2 setup, then trying to charge me to unlock it....for starters) Besides, I'm more of a DIY type and I'd rather...ya know...DIY.

I have the v2 setup that I've slowly be learning, but I can't for the life of me get those rear o2's back in service. Even temporarily just to pass the emissions check to get my registration renewed.

Any help or advice would be more that welcome and appreciated. I hate asking, but I'm at a loss and need to get this sorted on my daily driver asap. Thanks so much.

Can you post your tune file if that's ok with you...?

I have no problems at all posting it. Will have to do so when I get home tomorrow.
I'll even post my specs and upload it to the modified tune repository, in case anyone wants to use/modify it later on. It's a little on the rich side w/ my custom cam, but I'm still very much a novice w/ EFIL.

Thank you. :)

Here's my tune...and specs

08 C6 (LS3)
224/232, 113*, .625 cam
ported LS3 intake/TB
1 7/8" headers
Novi 1500 @ 8.25 psi
160* stat

Thanks for any help or advice. :) Maybe once I can get this sorted I can tackle the hot-start issue I'm having as well. lol.

Some more info regarding the Readiness (Inspection/Maintenance) Tests...

Thank you. :)

Looks like I DO need to complete more drive cycles...