Downloaded the lastest software that is supposed to have the capablity to read the tcm tune out of the 2009+ trucks. It recognizes the tcm and start to read and then freezes at 34k of 2560k. no error message. wait for a few minutes. one time 10+ minutes and click stop and it reboots tcm.
Truck is a 2010 model.
also set dtc UC101 after
Which version of firmware...?
When setting up the controllers you are selecting 'A50' and not 'AL6' for the 2009+ TCM? As Joe mentions do make sure you have the latest software and firmware.
- 7.5.6. Build 131: http://download.efilive.com/Software....131_Setup.exe
- 8.1.2 Build 112: http://download.efilive.com/Software....112_Setup.exe
- FlashScan V2 firmware 2.06.40 (included in V8 download)
Please see these guides for more details on software and firmware updates:
- Software: http://support.efilive.com/kb_articl...5404-IJZV-0820
- Firmware: http://support.efilive.com/kb_articl...7243-SFGL-2949
I didn't install the firmware.. got too excited i guess. most likely the problem. Thanks for the respones.