Your B4001 IFR has a huge kink in it, see attached pic...
Attachment 13487.
that huge kink is going to make tuning difficult (your injector flow rate does not behave like that at all).
Printable View
Your B4001 IFR has a huge kink in it, see attached pic...
Attachment 13487.
that huge kink is going to make tuning difficult (your injector flow rate does not behave like that at all).
Thanks Joe! I actually was doing some googling and it brought me to a post of yours on ls1tech about putting the calc_pids.text into the v7.5 user configuration. I have done that from the one i dumped on my desktop last week, but it looks like I had already done that back on april 14th of this year....probably when I started having this round-about issue :)
N2L,
Here is calc_pids.txt file to which I added the pid CALC.DAT constructed from table B4901 from your tune file Saf.tun from post #15 above.
What is your measured rail pressure...?
What injectors do you have (flowrate @ what pressure)...?
Car is 2000 Corvette, correct...?
I reread thru the thread, you said the injectors are the stock LS6 28 lb/hr injectors...
ok, do this, goto www.tunefiledepot.com and find a 2002 Corvette Z06/LS6 file and copy all of the injector tables into your tune file.
I tried the calVE deal and couldn't get it to work on my 98 pcm, obviously I must have missed something but there was a certain pid they wanted and I couldn't get it to work. I just stuck with autoVE and autoMAF :shrug: Works for me, my car runs great. Just takes a bit longer to do form what I understand. No biggie.
Ok, I will try to post this again, as last time it timed out and lost my text!
My buddy has needed his v2 cable so I could not work on my car for the last 1 1/2 weeks or so.
I have tried to use the new list, but i still have 2 red x's. Attached are my new tune to upload in which I have corrected my injector tables, all of them to match a 2003 z06 in which these injectors are. Stock rail pressure in which i think it used to read about 58-59 psi or something.
Which log will this be? a Calc.vet? What other changes to my tune will I need to do in order to make this work?
Thanks for everybody's patience!
And my calc_pids.txt is the file on reply #43. Dropped into the user configuration folder of EFI live V7.5