# Timing calculator.

Show 40 post(s) from this thread on one page
Page 1 of 2 12 Last
• June 25th, 2013
Quinton
Timing calculator.
Okay I'm clueless to the timing calculator for the cummins tuning in efilive. I've used Josh H's calculator for a duramax and it was easy. How do you set your % BTDC?
• June 26th, 2013
Quinton
Timing calculator.
Anyone?
• June 26th, 2013
2007 5.9
Timing calculator.
Are you looking for directions to find it?
• June 26th, 2013
Quinton
Timing calculator.
Quote:

Originally Posted by 2007 5.9
Are you looking for directions to find it?

No, I'm talking about the timing calculator in efilive's v7.5 software for dodge. Idk how to use it. I have Josh H's calculator in excel for Duramax's. I don't know how to adjust for say 50% BTDC on the cummins calculator in v7.5.
• June 26th, 2013
2007 5.9
Timing calculator.
Open it up and input the % you wish in the cells and click apply.
• June 26th, 2013
Quinton
Timing calculator.
Quote:

Originally Posted by 2007 5.9
Open it up and input the % you wish in the cells and click apply.

Isn't that just the lowest % timing set point?
• June 26th, 2013
2007 5.9
Timing calculator.
The values you put in the cells within the timing calc ARE the %.
• June 26th, 2013
Quinton
Timing calculator.
I don't get it. If I want the timing set at 50% before top dead center how do I put that in? This is the calculator I use. All you do is put in your % you want BTDC and minimum timing then you copy and paste your main injection pulse and fuel pressure and it does it for you. http://img.tapatalk.com/d/13/06/27/haja5e5u.jpg
• June 26th, 2013
Wheelz
Timing calculator.
Quote:

Originally Posted by Quinton
I don't get it. If I want the timing set at 50% before top dead center how do I put that in? This is the calculator I use. All you do is put in your % you want BTDC and minimum timing then you copy and paste your main injection pulse and fuel pressure and it does it for you. http://img.tapatalk.com/d/13/06/27/haja5e5u.jpg

You are way over complicating this. The calculator in EFI live lets you set the percentage BTDC for EACH cell in that table. So instead of your excel calculator only letting you define a single percentage that applies to the entire table, you can set your cruise area of the table to ~90% BTDC and your power range at 50% BTDC and blend them together for a nice smooth map.

If you want it to work like the excel book just select every cell in the timing calculator table and set it to 50%
• June 26th, 2013
Quinton
Timing calculator.
Quote:

Originally Posted by Wheelz
You are way over complicating this. The calculator in EFI live lets you set the percentage BTDC for EACH cell in that table. So instead of your excel calculator only letting you define a single percentage that applies to the entire table, you can set your cruise area of the table to ~90% BTDC and your power range at 50% BTDC and blend them together for a nice smooth map.

If you want it to work like the excel book just select every cell in the timing calculator table and set it to 50%

Ahhhhh!! Okay. I feel stupid now. I completely understand now. Thank y'all both very much.
Show 40 post(s) from this thread on one page
Page 1 of 2 12 Last