This update fixed the problem. Error $0106 gone and able to write to FlashScan again.
Thanks
Printable View
This update fixed the problem. Error $0106 gone and able to write to FlashScan again.
Thanks
I am seeing something new happening with serial widebands. I was prepping and testing a batch of converted autocals and noticed the afrs climbing into over the 100s. I tested this across an LC1, MTXL, X Series AEM and the old digital AEM. They all did the same thing. Minus the LC1, when the gauge was not maxed out the reading was dead on. I take it its not a big deal but I have not seen the AFRs go over 25 before. I tested this on the autocal, autocal as pass through, flashscan and flashscan as pass through.
Here is a video of it.
Hello
Comparison does not work
Double click on a calibration is not display this calibration.
315 version did not have such problems.
http://savepic.net/8758249m.jpg
Hello
On 318 version difference does not work
Double click on a calibration is not display this calibration.
315 version did not have such problems.
http://savepic.net/8758249m.jpg
Is anyone else having trouble with the compare tab not opening tables?
Ok, I confirmed that 318 fails on the compare double-click-goto-table.
Ok thanks guys