Thanks for all the help. But I was able to figure it out.
Type: Posts; User: RonnieW; Keyword(s):
Thanks for all the help. But I was able to figure it out.
I guess I have changed something and don't know what. My VE table numbers are something like 1.xxxx and I am used to numbers of 45.xxxx and 60.xxxx for tuning. What has changed? I need to do some...
Thanks Joe. I did that several times. They were both working as they should when tested by turning the engine over by hand.
Good luck with it. I just gave up for now and put the carburetor back on. Keep us informed please. I'll be trying again one day.
I'm using this crk CPS in the timing cover. I had to replace the one that came with the kit as it was bad. I used the part number on the sensor itself to find this one.......Crankshaft Position...
Ttt
PM sent, maybe twice. Thanks for the quick reply!
fleshe,
What did you end up using? I have a similar situation and need some help also. I did make a post. Do you have a tune file I could try?
Thanks
1970 Corvette SBC converting to coils per cylinder with LS 0411 PCM and modified wiring harness. Using a TPIS intake and throttlebody. Looking for help.
I installed the distributor delete with the...
I hate reading through a thread and it just quits. I'm sure the OP does too. It's like the movie just stops half way through.
Thanks for trying. It is on it's way for repair.
Well, that did not work. None of the keys are doing anything.
Thanks Blacky. I'll try this before sending it for repair, but none of the "F" keys were responding when I last had it connected.
plugged flashscan into computer (nothing else pluggged in to the flashscan), blank screen is lit up, none of the lights are blinking, holding the cntrl button down does nothing.
plugged flashscan into computer (nothing else pluggged in to the flashscan), blank screen is lit up, none of the lights are blinking, holding the cntrl button down does nothing.
Okay I will try this today. I do not have an SD card inserted (never have).
Thanks
Ronnie
It has the normal text displayed. What I would call the home screen noting which "F" keys to do what. I have always used it with my laptop or tablet. I have never used BB. None of the keys respond...
No, The flashscan screen is lit up. The second light and fourth lights are not flashing in unison. Second light goes on and off, fourth light constantly blinks. Fourth light blinks faster than the...
I'll check that tomorrow but the buttons haven't been working for a while when I press them.
My V2 has stopped responding to any buttons that I push. It has now stopped connecting to my pcm. I can't scan or flash. I have a tune that I would like to download but I can't. Is there any thing I...
My VE and IFR have been scaled back to keep from going into REP
I've already made VE adjustments to get the AFR to 11.3. I am in the process of tuning WOT so any suggestion are welcome. The Main VE is also a work in progress. What else should be done to the PE...
93 octane, no cats, look at the tune I attached to see if you think it is too lean or fat. What about the EGTs?
Thanks for taking the time!
Thanks for the reply. Did you buy LT1 plug wires that you had to put the ends on and cut the wires to length?