Search:

Does EFI support the 2000 Buick Regal 3.8 Liter with Supercharger platform? I looked at the supported vehicles, didn't find it listed. Just wanting to make sure one way or the other.

dave w

Thanks for the input. The customer recently made some internal engine mods, and now wants a dyno tune. Several months ago, the customer was happy with the auto cal tune I initially completed. The...

My customer does not own a V2. I own a V2, and my customer purchased a license to allow me to flash his PCM. I'm not liking the idea of loaning out my V2.

dave w

Thanks for the reply. So if I'm understanding your response correctly, my customer Will Have To Pay the Non LS1B Stream License dyno tuner a license fee? I agree, dyno tuners have expensive fees,...

I'm have a customer who wants to have a LS1B PCM I flashed for him with EFI Live dyno tuned.

My question is, can any EFI Live equipped dyno tune shop that Does Not Have a LS1B Stream License...

I'm getting Data PID error when I start to log my 99 C2500 7.4 liter. I'm wondering if I have something not set correctly? I ran a log for a minute or so with the engine at idle. See attached log....

I could not find a stock .tun file 99 Vortec 7.4 C2500 file at http://www.holdencrazy.com/EFILive/stockTunes.php.

Thanks in advance for helping,
dave w

I live in that northern suburb of Portland Oregon, Vancouver WA (USA)

dave w

Taz,
Everything works now. I made a very minor adjustment to "Sync" the CKP & CMP. I was maybe off by about 3 or 4 degrees.

Let me say "Thank You" again for the advice to use the Express Van...

I re-flashed the PCM with an Express Van L31 Vortec .tun. operating system and calibrations.

So the Noid Light problem has changed some. Now only #2 is not working, but #2 was working with the...

Taz,
I really appreciate the input and time you are spending with me on this tread!

Ok, I will Flash a modified Express Van Vortec 5.7 .tun file into the PCM. I wired the '0411 wiring harness...

Hi Taz,
I've done many hours of planning and homework on my '0411 project. I'm actually going to use a L31 5.7 Vortec distributor instead of "per coil". I set the "Low Resolution Crank" to YES and...

Taz,
Thanks for the reply.

I attached the current tune I'm working with, 8.1 with auto. I'm not ready to install the engine into the vehicle. I built my own harness. I want to get the engine...

If I ZERO out the Abuse Mode Disable Speed, can I use a Turbo 400 without a VSS for a Vortec 8.1 liter V8? I'm using the '0411 PCM.

Thanks,
dave w