Alright so now I have the issue remedied, I said screw it and just bypassed the PCM and ran the VSS wires direct to the Dakota Digital Module to get vehicle speed since it is apparently an issue for...
Type: Posts; User: Schwanke Engines; Keyword(s):
Alright so now I have the issue remedied, I said screw it and just bypassed the PCM and ran the VSS wires direct to the Dakota Digital Module to get vehicle speed since it is apparently an issue for...
Update: I have gotten the Speedo to read something, not I just have to figure out why the scale is so messed up It reads 60mph at 10mph and at 40mph it pegs 150mph on the gauge and reading via Scan...
Hello, I have a 1950 Chevy 3100 we are wrapping up with a 2010 Based 5.3L and with a TKX 5 speed manual trans behind it. I have the VSS wires pinned into the PCM connector but cannot for the life of...
Looking for a stock cal from a 99-02 Silverado Cable Drive 4.8L, 5.3L, or 6.0L with a Manual Trans, if anyone has one please share.
Have a 6.2L Iron Block Engine with GM CNC LS3 heads
Truck LY6 Intake with Edelbrock 90mm throttle body
230/240 Duration @.050
.592/.605 Lift
112 LSA
4L80E Trans with 3600 Stall converter.
NO...
I took all the Values and copied them over for from the 525HP one you linked, but still has the same issues with dying all the time its mildly better than what I had setup, but the damn thing just...
Unfortunately I am extremely limited on room in this 53 Chevy so the Intake consists of a 90 Degree Elbow with a Spectre MAF holder about 4" Long with an LS3/7 MAF installed in it and a Large Cone...
I used one of our stand alone E38 harnesses and T42 harness with some stock truck PCM and TCM.
Hey guys have a 53 Chevy Pickup we built that a customer insisted on running the GM 480/495HP Crate LS3 in with the 4L70E Trans. I dynoed the Truck and everything seemed good, but I cannot get this...
Im used to completely removing all Torque reduction from 24X stuff, how much would you suggest to add and only on the higher RPM's?
So we have a GM 480HP LS3 Crate that a customer wanted to use he ordered the engine and Trans it has E38 PCM and T42 PCM. I am having trouble with cut loose issues under heavy throttle between...
USB driver version is 02.12.26
I reloaded to a previous version and everything seems to be working fine now.
Well I take that back I just had an E38 randomly stop working in the middle of a Full Flash.
I almost always use V7.5 for everything since you cannot tune with V8. So I initially tried that, but it says that it has lost connection I tried with my Bench Harness and a complete engine harness...
It's Both V7 and V8 and only LS1A PCM's I just deleted both versions and re downloaded and tried again, Flashed up 2 E38's without Issues, but LS1A's will not connect.
Did Update and Now for whatever reason I suddenly cannot connect to any LS1A PCM I have 4 here and have tried them all it will not read that they are even there. Please Help.
Hello,
I don't do a lot of them, but Have several customers with the old ASA Engines and LS1A PCM's in them yet, for whatever reason I suddenly cannot connect to any LS1A PCM I have 4 here and...
I have a PCM, but want the calibration for a baseline. What would it cost roughly?
So a 63 Nova came into the shop today its got a stock 5.3L with a single Precision 75/76 Turbo setup on it with what I was told were 76 lb injectors. Its got a 4L80E trans with what I was told was a...
Hello,
I recently got a basket case GTO in, that has an HPT COS loaded into it or whatever they call it. Wondering if anyone has the capabilities to convert it to an EFI Live Tune file?
I...
Yes, This has only happened since updating the software, but it could be the vehicle's problem. I have been working on this truck for about a week now.
I was using V7 Scantool to log it just...
It started out that as soon as you started to log the MAF would just go right to 233.xx G/Sec and never move. So I grabbed another laptop and started to log it worked perfectly, then I got the log...
Hello, I downloaded the newest updates to V7.5 and 8 a week or 2 ago and ever since I have had a lot of issues logging, The biggest complaint is that MAF change at all. I have had other issues with...
I re-downloaded from website and seems to have fixed my issue Thanks, for the help.