The numbers in C6101 are maxed out.
Type: Posts; User: Earl H; Keyword(s):
The numbers in C6101 are maxed out.
Added
I have enclosed a copy of my current tune and a few logs. I am having a few issues and looking to see if some of the more experienced memebers can help me diagnose/fix the problems. Here are my...
I use a similar formula however at Idle, my boost guage and boost controller read 13psi vacuum and the pid yields ~ 6 psi of vacuum. Should the formula be adjusted to sync up with the boost guage....
ttt
Just started experiencing something that I am not sure how to handle. On a recent humid day, I let my car idle with the A/C on for a bit while warming up. It suddenly went into reduced power mode...
Nope;)
Why not just disable trims? {B3801} and {B4108}
Can you guys tell me what you think of these two files? BENS close enough. Commanded is at 14.6 on these passes. I haven't had a chance to adjust.
So what should we set it up to command 14.7 or 14.5? Once BENs are at ~ 1.0, then what?
So 3601 and 3647 must be different to prevent the pcm from slipping into semi close loop?
Please elaborate..I thought commanded was supposed to be 14.63 (stoic)?
Update: decided to go ahead and spend the time to do a full SD tune. I have been working for about a week re-learning the software and re-learning some old tuning procedures and learning many new...
Whats the final word on this? I just had this setup on my '03TT z06 and I am now wonderng if this is ok to use.
Guys,
I have a TT all bore '03 Z06. It currently runs high 9's at 144+mph. I want to get a bit more aggressive (i.e. turn up the boost). My car is currently tuned with the MAF. My tuner is...
I want to thanks EVERYONE that replied to this thread. I decided to reinstall everything, following the OS instruction to the letter...the car started and ran fine. As always, great support from a...
2 ended up being the default value. The tutorial said it should be at least 1, therefore I didn't change it. I will be trying the recommended steps 1st thing in the morning to see if they fix the...
I did flash the OS first and then the tune only. Please see attached for the tune. Thanks in advance for help.
I loaded Custom OS 0203003 into my 2003 z06. The car starts and then dies. I retraced all my steps to make sure that I performed than correctly. I checked the VATS (theft) settings and they all...
Should all the values in the coolant spark multiplier have a value of 1 or just those at the tail end of the table (i.e. 4000rpm)?[/quote]
Depends on how you want to setup your spark retarders ,...
Should all the values in the coolant spark multiplier have a value of 1 or just those at the tail end of the table (i.e. 4000rpm)?
I'm confused, which is pretty common these days :D
The explanation in tune says:
{AOO10}
Once the MAP is above the maximum value allowed in {B0101} "Main VE Table", the PCM will subtract this...
I am thinking of reflashing to custom operating system: 2/3Bar version. I'm not ready to retune, however you cant see the table values until you reflash into the pcm. If I reflash the OS and...
I am starting to read up on the 2/3 Bar Tuning.
I'm a little confused on the Boost Timing Table {A0010}. The .pdf manual says the value will be subtracted from the final timing table value.
...
Thanks Paul,
As usual, worked like a charm. Cant wait to switch over the 3 bar OS and tuning this winter.