Search:

Type: Posts; User: joecar; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 0.13 seconds.

  1. You might try to uninstall and reinstall the USB...

    You might try to uninstall and reinstall the USB driver.

    If this does not resolve the issue, then there is a good chance the USB socket's solder joints are cracked... or the USB device's...
  2. Sounds like the USB connector's solder joints may...

    Sounds like the USB connector's solder joints may have cracked...


    Where are you located (approximately)...?
  3. Hey Mick, good to see you here :cheers:

    Hey Mick, good to see you here :cheers:
  4. Replies
    7
    Views
    208

    IFR is correct based on the first cell (at...

    IFR is correct based on the first cell (at MANVAC=0) being correct.




    rate(MANVAC) = rate(0) * sqrt((400+MANVAC)/400)

    where:
    MANVAC is the IFR table axis in kPa.
    rate(MANVAC) is the rate...
  5. Thread: P1516 Cax file

    by joecar
    Replies
    4
    Views
    213

    ChipsByAl, thanks. J.Abbot, there are no cax...

    ChipsByAl, thanks.

    J.Abbot, there are no cax files for anything other than LS1B that I know of.
  6. The 0333/0334 still outputs analog 0-5V, but is...

    The 0333/0334 still outputs analog 0-5V, but is more intended for E38, E67, E92 tuning.

    The 0333 is specifically for single wideband to CAN; the 0334 is for dual widebands to CAN.

    EFILive has a...
  7. Replies
    7
    Views
    208

    Post your tune file, I'll check the IFR table.

    Post your tune file, I'll check the IFR table.
  8. Replies
    42
    Views
    2,526

    Subscribing...

    Subscribing...
  9. Replies
    7
    Views
    208

    Also, do you have data for "Minimum Transient...

    Also, do you have data for "Minimum Transient Pulsewidth" (B9021)...?
  10. Replies
    7
    Views
    208

    Is your FPR referenced or un-referenced (from...

    Is your FPR referenced or un-referenced (from what you said, sounds like referenced)...?

    See this: Calculating-Injector-Flow-rate
  11. Replies
    6
    Views
    182

    Which stickies did you read thru...?

    Which stickies did you read thru...?
  12. Replies
    6
    Views
    182

    Also: what are you doing with...

    Also:

    what are you doing with "(({CALC.AEM_AFR}-{GM.AFR})/{GM.AFR})*100", how are you adding that much percent to the VE table...?

    If you use "{CALC.AEM_AFR}/{GM.AFR}" you can paste-multiply...
  13. Replies
    6
    Views
    182

    Important: are you seeing a MAF DTC...?

    Important: are you seeing a MAF DTC...?
  14. Do the IAT and MAP pids show correct values...? ...

    Do the IAT and MAP pids show correct values...?

    Post a log file.
  15. Thread: Calc_pids

    by joecar
    Replies
    3
    Views
    113

    You got it going...?

    You got it going...?
  16. Thread: P1516 Cax file

    by joecar
    Replies
    4
    Views
    213

    I don't see a cax mapping for 12614676. (...

    I don't see a cax mapping for 12614676.

    ( hmmm, does the 2007 Y-car use an LS1B or an E40...? )
  17. Thread: E92 maf

    by joecar
    Replies
    1
    Views
    176

    Post the stock tune .ctz file.

    Post the stock tune .ctz file.
  18. Replies
    18
    Views
    1,785

    I'm sorry, I did not see any emails (my email...

    I'm sorry, I did not see any emails (my email provider blocks @gmail and @yahoo)...

    it is easier for me if you post pics and files here.
  19. Thread: No Lockup

    by joecar
    Replies
    13
    Views
    1,456

    In your ctz file, the TCC release tables are set...

    In your ctz file, the TCC release tables are set to 318 mph... this keeps your TCC unlocked.
  20. Thread: No Lockup

    by joecar
    Replies
    13
    Views
    1,456

    Log shows that TCM never commanded TCC lock...

    Log shows that TCM never commanded TCC lock...
  21. Post tune. Log GM.KR and post log.

    Post tune.

    Log GM.KR and post log.
  22. It is an engineering marvel, no doubt about...

    It is an engineering marvel, no doubt about that... but it is complex, and I like my critical systems to be simple :) :)
  23. When you connect to a PC, unplug the USB cable...

    When you connect to a PC, unplug the USB cable and replug it... when you do this, does any notification appear on the Windows tray (nets to the clock)...?
  24. In V8 software, goto the VIN Licenses page, see...

    In V8 software, goto the VIN Licenses page, see if shows your PCM's serial number as you see it in your pic above.
  25. Good deal, thanks for confirming.

    Good deal, thanks for confirming.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4