Search:

A lot of the tune was not touched by me but was done by someone on this board a ways back to help me because I didn't know much.

Putting these values back to stock results in a much worse running...

Which area of the tune are you seeing this so I can look into it?

Forgive the ignorance, its just been long enough that its like I'm starting from scratch on most of my knowledge.

What parameters should I make sure I'm logging for before posting a log?

Should I start from a fresh upload of the tune before the computer has done any learning? It seems pretty hit and miss on...

Basically its been a while since I've messed with anything related to my tune and I've lost almost all my knowledge on it because of that.

My problem is that when I put the truck in drive and get...

Any ideas?

Well I did everything posted and got the firmware to update to its latest version. But I'm still having the $0333 error and cant do any reading or flashing.

One odd thing I've noticed that may or...

All of a sudden I cant flash or read tunes on my V2 without getting the $0333 code.

What would cause this all of a sudden? How do I fix it?

The only thing I did different was open the original...

Ok, I appear to have gotten it all fixed up.

Thanks for the help

Ok now I got the VE multipliers map working, but the MAF BEN corrected table of grams/s is not working for some reason.

Ok, got everything going from the file help you gave me.

Only problem is, when I activate the wo2BEN it is not activating MAFT or VET like it normally used to.

I went in to the text file and...

Ok, yeah post those up for me please. I won't be able to take pictures until much later, so if I can have what I need ready to go, hopefully I can finish it up tonight or tomorrow morning.

Thanks...

I previously had everything set up in my V7.5 scantool and working perfectly for my calc.maft tuning.

Except the filter feature stopping actually filtering.

After a while I just decided to...

A few logs I did with the latest tune:

17296
17297
17298

Here is the log you asked for:

17281

Did rafig before ve/maf change.

Logs:

17260
17261
17259
17258

Updated Tune:

17262

I could be reading things wrong, but I think you nailed it on the first try.

Here is my most recent tune with rafig/rafpn done from cold and then hot:

17246

And here are the log files that...

Here is my newest update to tune with rafig/rafpn done, etc:

17233

And logs for rafig/rafpn at full operating temperature after an hour or so:

Park
17234
Drive
17235

Here is latest tune used to get logs below:

17223

And here are drive and park logs with MAF readings after an hour or so of driving then being back home taking these logs at idle:

17225...

Another couple logs with same tune as above:

17212
17213

Here is my current tune:

17201

In the tunes a bit early in thread I had the low octane spark tables 6 degrees less than the high, but forgot with MAF failed it defaulted to low. So copied...

Here is the new log with A/c running:

17190

I'm not sure completely, but I dont think it liked the increased timing added around idle rpms. I had lowered those previously to what they were...

Here is a log from today using your most recently updated tune for me, but with the A/c running:

17185

Since my last update, I have installed a new IAC sensor, new PCM, opened up the IAC port on the FAST 92mm tb, and worked on an potential ground wire problems.

Here is my current tune:

17178
...

Just an update, I have purchased a new IAC valve and PCM, but have yet to install it.

When I do, Hopefully that will solve the problem. But am waiting on the PCM to be delivered, and then I will...