Search:

Specifically the PCM pinouts. I can't find them, thought I had them on this computer but I was wrong. I have the 2010 but... I don't think they are the same.

Ouch! Anyone know anything about the differences between the e69/e39 camaro's? Can I swap out the harness/ecu to a 12+, sensor differences? Crankshaft tooth count?

Bringing this back so I can be really clear, the V6 Camaro 2010-11, is or is not supported? I don't see it under supported vehicles although I do see a few other 3.6L cars.

Thanks in advance :)

Awesome! Thanks for the quick reply, as always.

Is this pcm/ecu as manageable as a swap candidate? Will it work without all the other interfaces from the Camaro? Tune-able? Searched and it seems to be but... Hate to buy it and find I can't make it...

Sorry guys seems I left everyone hanging. The moror is definetely a 24 as is the PCM, 3 plugs and has e40 on it inside the fins.. The only real problems now are the lack of tach signal and an...

Also when is the box available, I'd like to see if it works with the 06' miata steering wheel controls.

I'm with ssvolvo and futhurmore what is up with the e40 tach output, can't get it to work with my Stewart Warner gauge?

Well everyone Thanks. I'm inspected and tagged woohoo!

Well that was freaking easy when you have those kind of directions, Thank You! We'll see if the miata vin shows up tomorrow when I try to inspect it. Fingers crossed.

Again Everyone, Thanks a ton,...

Thanks a ton I'm super close now, already read the pcm and saved a copy. It looks like there are 2 places to input vin. Can any tell me where I can go to study up on how to do this, the manual I have...

OK so my answer is:


Yes I can input the Miata vin with EFI
I can leave it the miata vin and still tune
MIL light may not work correctly
I'll need delete the HPT tune out of the car and...

Heres what has happened. When I started this swap 2 years ago North Carolina only looked for error codes and didn't reference the VIN, now they do. The car is tuned via HPTuners and it can't do it....

Ahhh. If it were only that simple. We're entering the next level in swapping. CAN-BUS. Not the mention big brother sticking his neck where it has no right. Short version, 06'car, 06' engine & 06'...

I think my problem is the reverse, I need a 24t to 58t. Seems I now have some sort of crank signal, coils and injectors have power while cranking. Fuel pump also comes on now while cranking. Neither...

Sorta muddied this thread I started another for this issue, I'll post there. thanks

I can think of a few things I'd like to do to it with a brick.

See. This is what confuses me. This thread has a file that says some of the e40's were indeed 58t, so what gives? Yep wiring is correct, yep got 12 on the blue/white wire and yep its the black...

Yes the 12v and signal are reversed between the front and rear. I keep coming back to the crank. I'm wondering if the e40 I have was actually setup as a 58t and not a GTO e40. Can it be switched from...

Me too, which brings back too pcm looking for a 58t while I have a 24t. Does anyone know if all the e40's are the same? can it run either 58t & 24t or are there two different pcm's?

I posted this question futher up and then realized its own thread may be better. I've got it all together but have no RPM signal. Where does the 06' GTO gather its RPM signal. System consists of L33...

Being this started as a swap friendly thread I have a direct pcm/engine question. The parts are: 06' L33 (5.3 aluminum Truck block) & an 06' e40 and GTO harness. These both run 24X & 1X but the GTO...

Thanks. Thinking about it there should be a swap forum. The LS is going into everything these days, even mustangs are getting heartbeats. haha
There is alot of info that pertains to pcm systems that...

I'm unsure of where to post this thread so if it is in the wrong place then feel free to move it. I'm putting an E67 pcm'ed 2.4 Solstice engine in a miata. I'm trying to figure out which...

Well I don't know about the coolest ever but its sure gonna be fun. :)