all three lights came on before and after the speedo cal. Understand I wont have ABS or TCS with these tire's installed. Will pulling the ABS fuse stop the lights for coming on? Im just worried about...
Type: Posts; User: gcross; Keyword(s):
all three lights came on before and after the speedo cal. Understand I wont have ABS or TCS with these tire's installed. Will pulling the ABS fuse stop the lights for coming on? Im just worried about...
thanks i'll give it a shot
I changed my rear tire size to a 295/50R16 (mickey thompson) on my 02 TA. (which looks sweet by the way). But now the ABS INOP, Brake and TCS off light is on. The brake feel like they are working...
I just got some new codes P0171 (system lean, left bank on 4 sensor) and P0174 (system too lean, right bank). My question is what does this mean (beside it's running lean) and how do I fix it. The...
Well i'm in guam the land that never goes below 75. When I crank the engine in it's cold iac goes up to 160 the drops to 145 when engine goes close loop.
engine 5.7 LS1 with Ls1 hot cam and LS6...
I've heard that 80 is good for a hot idle. How bad is it for engine to run about 145 steps. It's doing this with a holley 90mm. I'm almost out of room to adjust the set screw to open the blade more....
Currently running in CLSD, the problem is that when th ecar is cold it has a bas hunting and surging, and feels like a strain on the car. It idles good after it grabs it self from the surge. I guess...
Hey guys tell me if this can happen. I've been tuning the car good thanks to you guys. But I've seen that the car will run great for a day or two then slowly starts to go back to bad. It has done...
yes to start with, thanks again.
Thanks Joe the turn is working out great, also thanks to everybody else that helped out. All you guys have been a big help. EFI live is starting to all come to me now. Next I think I'll try a custom...
Thanks to all I'll give it a shot
enclosed is tunes that i used today trying to auto ve, it get worst as I went.
autove 1-18 00001 goes with sdautve
autove 1-18 00002 goes with sdautove1-18-01
which gave me sdautove1-18-02
...
Well I gave it a try again today. With little progress. When I do the autoVe in lowers many of my cells which great for idle AFR but no power at all. I'm just thinking out loud here. But with a lower...
i'l give it a try tomorrow takes, the tune on the was first from thunder racing, i did a mail off pcm thing prior to getting efi live (bad move on my part).
also all egr stuff removed
ls1 hot cam with spring and rockers, holley 90mm, ls6 intack mod to 90, slp long tube, cat's removed, magnaflow cat back exhaust, stock heads with port and polish, k&N cold air, NGK plugs, that about...
hello all
I still need some knowledge.
I've been working with autove maybe you guys can tell me what i'm doing wrong. My idle afr is about 12 with iac steps at 130. When i adjust my ve with the...
hey guys,
I just get my LC-1 installed and it's great. But I did find out that in idle I'm reading rich I believe. Its about 11.6, but as soon as you get on the throttle it start to get closer...
my knowledge on o2wbd is very limited so please bear with me. I see you said you have a pair of them. Do I need to get two, one for each side? Also I still have o2 senors 3 and 4 (back ones)...
thanks guys I'll give it a try and let you all know how it goes. which o2wdb do you guys like, i'm thinking about the LC-1
First let me say hello, I have been reading these forum for about 6 months (ever since I started with EFILIVE). I have learned alot from you guys since then, for that I thank you. But I have ran into...