I have normally just used STFT's for adjusting the VVE. I tried using the BEN factors but my results always ended up weird looking and trims still all over the place when back in CL.
One thing to...
Type: Posts; User: Dieselman; Keyword(s):
I have normally just used STFT's for adjusting the VVE. I tried using the BEN factors but my results always ended up weird looking and trims still all over the place when back in CL.
One thing to...
I would swap them to the opposite bank and see if the problem follows that sensor. Cheap and easy way to find out
Thanks Joe. I have done lots of logs in the past but never noticed it before. I thought it may have been something to do with emissions
Hello everyone,
Could somebody have a look at this log for me and tell me what is going on between frame 13252 and 13500.
Moves from stoich to lean and then rich with a spark drop to match ?
...
I can get this to work with my E38 tune and log. Need to make sure you activate the "Automatically Track Scantool" tab
Not too sure if this is what you are after ?
18550
...
I'm pretty sure I have played with that. Timing shouldn't drop below what is in that table
Thanks Joecar that is the one :cheers:
Hello All,
Does anyone have a copy of file number 24267577 on hand. I tried Tune Depot but could'nt download it for some reason ?
Cheers
Big thanks from me too. Excellent work !!
Thanks for your time on this Chris. Finally got around to looking at it today. Works perfect :)
Are you still running the stock Tranny tune Bob ??
If I can remember correctly these are the settings for when the ECM uses the MAF readings for all airflow measurements. I take it the tune was a MAF only tune and not Speed Density ??
Happy to be...
Check this out mate. A lot of good info in there
http://forum.efilive.com/showthread.php?18108-ADAPTS-procedure
Hope it helps :)
ESP - Electronic stability program :)
Thanks for the write up Ross :cheers:
I have been looking at wiring diagrams and was going to do a similar project on my VE Calais.
Ben
I got the photo off someone else on the EFI Melb facebook group. Maybe Simon or Luis could get a part number from a newer car. My car is a 08 Calais and does not run a sensor but I was hoping to...
Fuel composition sensor on Holden VE tank. Sensor on LHS I think :mrgreen:
13166
Is that the price for the Ethanol sensor??
I think the sensors are mounted on the fuel tank in the Holden VE.
Ben
I just copy and paste on the BBX screen itself ??
Can you just copy all the PID's into another list without the T43 selected (and delete the T43 PID's of coarse) ??
Ben
Hey mate I reckon they are probably saved as *tun files. The easiest way would be to go through the ones you really want and save them as *ctz files. Just open them in 7.5 Tune Tool first, then click...
What are the files you can see ?? Tun or Ctd
Here is a copy of my PID lists 13027
Save that to EFILive/V8/tmp and you should be able to open it up in the BBX tab :)
Cheers
Ben
Also if you look through your PID list on the BBx setup there is a lot of stuff you can log via the TCM instead of filling up your ECM list. I am logging coolant, intake temps and RPM just to name a...
I highlighted the whole table and increased by 5% at a time until happy with shift quality. I am at 15% currently