FYI ... EFLive in VM on MacOS AOK here for years with a V2 and 7.5 as well as 8.
Type: Posts; User: gmh308; Keyword(s):
FYI ... EFLive in VM on MacOS AOK here for years with a V2 and 7.5 as well as 8.
it is worth pushing your VVE table up and down. For example try 15% up and see if it gets better. SD MAF on scan should match Real MAF. Roughly that is. If your setup has moved the airflow away from...
Something like this probably easiest:
https://www.altronics.com.au/p/q1542-pocket-size-audio-signal-generator/
Anything that will at the very least generate a 50-150Hz square wave.
Wow 46,000+ views - the second most popular non-sticky thread on the forum. :O . I see some folks even built businesses out of the EFILive Flex Fuel information on here.
Anyway, back to the...
Thats right, it limits at the torque number via throttle limiting in the respective gear at the particular RPM.
Traction control when you dont have traction control ;)
The cal is set for serial data in the image - is that what you have set it up for?
It shouldn't need to be re-learned manually. It should "just" work. Does the throttle blade operate full sweep as you stroke the pedal? Are you sure it is the right pedal for the calibration in the...
That looks like the FPCM unit in the engine harness pic, this is a T87 shown with the trans yes? :-
21749
Fingers crossed they are not E92A and T87A controllers. If E92 & T87, should be AOK! ;)
You can't edit the HPT Custom OS based file - last 4 digits 0233, so you will need to find an equivalent EFILive .ctz or .tun file - which were available on tunefiledepot.com but it appears to have...
Have you checked scan to see if the injectors are pulsing? The ECM knows the engine is cranking via the crank pulse. If you have added air flow via a larger TB, then likely you need to add...
If its a Speartech harness it will be fine! ;)
Good thanks Joe! ;) You? Good winter there in So Cal?
What Joe said Pat, but not knowing what you have in the 12612381 OS, i.e. which areas are revised, best to leave the 12617631 idle & ETC area etc alone. At least initially. As they are different...
What is the original Holden OS for ECM and TCM? Some items may be applicable, some not.
Per other thread - if ECM at fault - quite unusual. More likely wiring if you already changed the O2 sensor out. Surprising that Diag systems is not detecting the lazy O2 signal. Normally the diags...
If it was an ECM problem - would be the first I ever heard of. :)
What Joe said ^^^ :)
LOL great thanks Joe. Your spelling & grammar looked fine. :)
What Joe said ;).
Yes what Joecar says is correct. Anything out of 06/07 12597121 stays there. Early 06 E38 = kryptonite. (12603892? IIRC - careful) 08-12612384 09-12625455 10+ 12633238.
E38 got planned 03-04 -...
It really comes down to CAN and power. Have never seen a dead E38 that wouldnt say hello - but first time for everything. :)
Did you select E38 manually or allow auto detect to find it?
Are you running a T42 or the TC2 controller in the instructions?
That's a cool transplant. Should haul along real nice! :rockon:
If you just want to VATS patch the 2010 ECM and start the C6 - probably AOK (apart from maybe the MAF type in the Camaro being different to the C6 blade MAF).
Expanding on what Ross mentioned -...