Search:

Hey,

Quick feedback. Got it all going...

When I select TPS VE does that automatically make it open loop? It would be nice to retain some Closed loop if possible...

Also is the power...

Excuse me but I didnt get that. What do you mean with 0411?

Am I trying something impossible?

Scan tool was not connected.

Original ECU file is 09381344 . 12225074 file came from the dropbox link I posted...

Joecar,

Thanks yet again for your help- however cannot full flash either the 1222507 or the COS5 - it just does not allow me to select the full flash button.

Any idea why that is?

Ok that wasn't so hard... I found it here
...

Hi,

I have a hot LS1 with ITBs and want to use the COS5 for its TPS VE capabilities

If I understand correctly I have to full reflash the 12225074 OS File and than reflash the original tune file...

Hi joecar,

I'm still having some issues. My PIDs are good (calculated dynair and appropriate calc.pid) and I made a log. However when I try to make the maps for maf correction and selben (ltft),...

Joecar,

So I've noticed my mistake, there where a few PIds missing that wouldn't allow me to get the Calc.Selben.

The only PID that has a cross (invalid) is the Dynamic Air Temp -...

Hey joecar,

Here are the tune and log files.1839618397

Note:I haven't disabled CAT protection, DFCO or changed O2 switch points as suggested on the Calc VET Summary notes - can this be an...

Hey joecar,

Sorry to take so long. I have tested it and I can see the cells moving and they have the same value as the datalog (approximate). the value is not exactly the same but I believe that...

Thanks both of you. Managed to select all the PIDs now (thx joecar for the tip). One weird thing was that I managed to log the GM.VETABLE_DMA Pid.

I attached the log file - 18369 . Hopefully you...

Thanks, as always you r the MAN!

So my ECU doesn't have GM.VETABLE_DMA but I think I can still go SD and tune the VE table correct? Or maybe go straight to 12212156 and then do MAFT and correct...

Hello fellows,

I'm currently tuning my first LS1 engined car. Its this one-tonner ute:
http://s3.postimg.org/phygqcrof/IMG_20150502_152636.jpg

The car has been tuned before and Ive checked the...

Thanks joecar!

Couldn't quite understand what you meant with the PE enable...

Any input on idle AFR?

So I've finished tuning this car. All went well and customer was happy.

Just wanted to thank you for all the help.

The only issue that wasn't quite perfect was idle. It was a litle rought and...

Hello everyone,

So I've been able to flash the ECU so the gates are open!

I checked my current calibration (from another tuner -dont know who)

I have some questions that I hope you can help...

Quick update:

I have sorted the speed related problem - issue with the magnetic suspension - goes away when unplugged.

I have the IAT sorted as well and reading fine

I want to improve idle...

Thanks, that has been very helpful.

So I've connected a GM IAT sensor and its reading just fine now.

However, the car still fails on the higher gears. For example, in second gear it pulls to...

Hello fellow enthusiasts/ tuners,

We are a automotive business in Bathurst, Australia and this is our first EFI Live tune.

This car is not stock, which adds to the complexity and I would like...