Blacky: Email sent
Type: Posts; User: Tool Guy; Keyword(s):
Blacky: Email sent
statesman: I did what you suggested and it worked. I unchecked all the other pids except for GM.MAFFREQ and it validated it. What do I do next?
Statesman: I did what you suggested, and the situation is unchanged.
I have attached two screenshots. Both the Pid list and the about page
I did. There was no change. Also, I just updated to the latest versions of 7.5 & 8 and now more pids are invalid. I don't have rpm or engine temp anymore.
I unchecked the supported tab and i found it on the list. It validated the coolant temp sensor but there is a red x on GM.MAFFREQ, GM.KR, GM.EQUIVRATIO, AND GM.IBPW1. How do I get them to validate?
I don't see it on the list. I only see GM.MAFERROR and GM.MAFFREQ2. I validated the pids with shift+f2. Also, I can't find coolant temp. I sorted them by selecting units then trying each one. ...
Thanks. What is the correct pid to log maf hz?
I am getting an error report (out of range) when I try to log MAF raw frequency GM.MAFFREQ2. Is this not supported?
Thanks for looking at it. In your opinion, the tune isn't the problem? The procedure for the p0507 says to look for an air leak in the intake. I did a smoke test and didn't see anything. I also...
Hi. I am having a little trouble with a 2007 Zo6. The car has a cam, ported heads, and NW 102. The car runs great, but I will get a P0606 (blinking) for a few sec during WOT and P0507. ...
No, I am using the stock OS. I cam across this thread http://forum.efilive.com/showthread.php?16350-my-air-bag-light-came-on-after-a-tune&highlight=camaro+sdm and found that my Vin number was...
I did a tune for a 2003 corvette A4. It has full exhaust and a cai, otherwise it's stock. I did a full flash and now it has issues with the oil life reset and is showing a b1001 'option config...
I have the exact same issue as described by the op. Is there a solution? In my case, it only does it below 2k rpm. I matched the decel spark to the main spark just to see what happened and all I...
I switched the data in the scan tool and it works. Thanks again for the help.
It worked. I removed the pids and every thing went back to normal. Thanks for the help.
The other thing I noticed was while logging data, the data would show up on the tune tool during...
I did. I added E38.SCALEDCORVE_DMA and E38.SCALEDUNVE_DMA and CALC.E38_VE. I wanted to make a map of the vve table in the logger, so I grabbed RPM and CALC.E38_VE because I didn't see a valid MAP...
I did try to revalidate the pids, but that didn't change anything. The selected pids even show up in the data tab. The problem is the data is maxed negative for every selected pid from the instant...
I am trying to log a 07 corvette with an E38. Yesterday, it was scanning fine and all my calc pids worked. Today, I turn everything on to log and tune, and nothing. The bi-directional controlls...
Thanks for the reply. I did not edit the sae_generic.txt. I did edit the calc_pids.txt in the user configuration folder. After I unchecked the supported box, I saw the pids. I was able to conect...
I think I got it. I unchecked the supported box and scrolled down. I have to connect to the car and try to validate the pids now. If anyone thinks of anything I am missing, please let me know. ...
Hi, I am new to efi live. I followed the instructions on how to create pids, but I cant find them in the scanner. How do you take the edited .txt file (with the pid info) and make it work? I...