Terrific! Thanks Jim, that clears it up nicely!
Type: Posts; User: DaddySS; Keyword(s):
Terrific! Thanks Jim, that clears it up nicely!
Just to confirm, after transferring "all licenses (recommended)" my V1 will still be licensed for the Camaro I originally purchased for and my V2 will work on my new Camaro or on the old Camaro if I...
One more question for the team - what is the difference between startup friction airflow correction and start up airflow correction?
OK, I think I got it - I kind of answered my own question as I was typing before. It started right up but stumbled, and after adding 20% to Startup friction it cranked over several times before...
I increased the start up friction by 20% which solved the stumble:grin: but now it is harder starting - takes more cranks to fire it up. Thoughts?
Are the following Tables stock or modified?
1. B3605 Commanded Fuel in Open Loop
2. B5936 Idle Underspeed Error
B3605 is 5% reduced from stock
B5936 is stock
It runs really good except...
Here's the tune file and the log, you can see where it stumbles at frame 41
I have an annoying symptom:
The car starts fine, idles up to 1600 RPM and then about three seconds in, it stumbles down to 600, recovers back up to fast idle and then runs fine. It only does it...
Yes, Baldric helped - I posted it in General tuning - I am guessing that after one of the updates it was now looking for the cable and hardware to be plugged in? Anyway, it worked and it's fine. ...
Outstanding - that worked. Thanks very much!
Excellent, I'll try that and thanks for the response!
No, this is my desktop version - it has not been attached to the vehicle - are you saying I should just try with the cable only connected to the PC?
Looking for a little help here, I am getting a registration error but the information is correct?
http://forum.efilive.com/showthread.php?t=10965
I checked versus my laptop and the they are identical?
Thanks, I did check and it is correct? I'll check it against what's running on my laptop - just odd that I didn't get the message before?
I am getting a regitrattion error - "unregistered demo verion". I am running 7.5.5 build 86. When I check the "register efi live" section under help - all the registration information is there?
...
My understanding is also this:
It is easier to "light" a lean mixture and when it's too lean and you hear knocking it is because the compression is firing off the fuel (like a diesel) as the...
OK great, thanks for the help.:bad:
Not sure if this is the right forum, but in the past there were compatibility issues with having HP Tuners loaded on the same PC with EFI live. Do those issues exist with the latest versions?
Excellent, thanks for the replies
Wasn't sure where to post - are there any issues with XP service pack 3 that I need to be concerned with or should I go ahead and do the upgrade?
If you are looking for a laptop to primarily do your car stuff, there are laptops with XP on ebay for like $350 in great condition. I bought one, it was like new, 1.7ghz proc., 1g memory, 80 gig...
You can use a newer tune but will want to start with the 99 to 02 conversion file or similar to modify the new OS to your 2000 hardware - others should also chime in but that is my understanding.
The MAP sensor- not the MAF?
Interesting, I'm in the same "place" that you are. After a great deal of reading, adjusting, etc., etc. I have a lot of the issues solved but it is very messy. So like you, with a good deal more...