Search:

What is the gong price for on of these ECM AFM1500 and where do you buy them in Australia?

I thought it was as the intake temp warmed, up it said IAT.

Thanks just read somewhere that different grades of petrol had different stoich. making sure

If im using 98 octane petrol should i be commanding 15 stoich or around there??

In cos 3 this table is given to help control afr temperature fluctuations i assume? I was thinking tho the pcm takes the iat reading and the ECT reading and uses blend table depending on airspeed to...

Who cares about cats unless you need an emissions test? turn it off.

LS3 with standard cam. ls1 computer cats etc.

Joe- so high flow cats work at a different stoich? or just less lenient to error? with standard switch points in CL with high flow cats i was getting...

The key to passing an emission test other that a clean burning and firing engine is to have catalytic converters in working order and running at exactly 14.7 AFR. i have just recently had to do a bit...

not sure about the engines you are talking about we just have ls1 in Australia. if your using the computer from the 5.3 to run the 4.8 unless they have the same heads and injectors and ignition setup...

B2101 should be 128.125000 and B2103 should be -0.312500 if its the same as the ls3 which i would say it would be because i was getting similar reading to you with your stock settings. It seems like...

are you in high altitude? your map max is 85? if it is the ls3 bosh type map sensor on your engine you need to correct the scale.

post the tune?

I never got a user manual with mine i don't think nothing 150 pages?? where is that from?

Just wondering how to do this? click case learn button in efi live then rev to what? 2500? then it misfires or something like that and your ment to turn car off for 15 seconds

it was working but its back again so must have been something else.

i had just updated it to the latest one. i think its a win 7 thing it wouldn't allow the v8 explorer to access something in my v2 on close down? Running it in admin mode the access violation didn't...

solved by enabling admin to run program in win 7

i get this error after i close efilive v8 explorer

"Access violation at address 005A56B4 in module 'EFILive_Hapi.exe'.
Read adress of 00000044.

it continues to pop up forever one on top of the...

can EFI live edit the v6 commodore tune the 3.8L ecotech or whatever its called?

i get this error when i try to update the pids in bbl useing the autocal pid selection program?? there is no txt files in the folder its looking only ppm or pmm or somthing. i have windows 7. is this...

the trims was actually from an exhaust leak. however they still switch different one swings from 200-800mV the other 400-500mV. and they arnt in sync but they have independent correction so that...

ok thats good. swaped them over one still acts alot dofferent to the other. is seems to function still it switches might just be a different brand dont know??

another question about stft. if 1 bank is -15% and the other -1% is 15% subtracted from 1 bank and 1% from the other or does it average over both? mine are about 10% different all the time.

another question is bank 1 the drivers or passenger side? i'm in australia RHS drive also.

i'm not sure if one of my o2 sensors is ok. they never seem to be in the same cycle allways in opersate, one will be lean the other rich of the switch point. also one switched between 400 and 500mv...