Search:

Type: Posts; User: SOMFormula; Keyword(s):

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Yes. The shop who built this car completely...

    Yes. The shop who built this car completely redid the PCV system. So, I'm having to go through it as re-think how I want to set it up.
    Adding 200hp to a stock engine really overwhelms the stock...
  2. That’s what I was doing. I even suspected the...

    That’s what I was doing. I even suspected the MAF (which is what prompted me to also look at swapping the throttle body)
    The car came to me with a NW 103 (which tunes like a stock TB for the first...
  3. Solved.... So, the shop that built the car...

    Solved....

    So, the shop that built the car (I’m just tuning it) did a weird catch can setup.
    I pulled off the air intake and the associated PCV hose off of the intake. I disabled the MAF for...
  4. So, I’ve swapped the coil packs and the C6...

    So, I’ve swapped the coil packs and the C6 doesn’t have a fuel filter
    I did test fuel pressure and no issues

    One thing to note, is when I start it up, if I keep my foot on the throttle, it will...
  5. Post up the trans and engine file. So I can...

    Post up the trans and engine file. So I can compare it to what I do to those.
  6. 2009 Z06 - Just shuts off. Heavily modded. Any help would be appreciated

    2009 Z06 LS7
    Heads + Cam + Headers + ported MSD + NW 103 + ID 1050x + FLEX FUEL
    Lightweight clutch. E-water pump.
    OS: 12628988

    I tuned this car about 2 months ago. Cars been running great...
  7. 23656 I have a few trying to make small...

    23656

    I have a few trying to make small changes to get it to work if you need to look at another one.
  8. E78 - 2011 chev silvy 2500 6.0l gas - no start after calibration edit

    23653

    I'm having a weird issue.
    When I go to edit the file, the truck won't start.
    It only does it when I edit the Engine Calibration. I've tried just changing other parameters in the file...
  9. Replies
    11
    Views
    4,288

    I’m on my phone. But you can do a LOT with the...

    I’m on my phone. But you can do a LOT with the 6L’s. They are far superior to the 4L’s of yesterday!
    There is a “sticky” here on the forum. You’ll want to read it! It explains how the 6L works. ...
  10. Replies
    11
    Views
    4,288

    And I’m posting from my phone which probably...

    And I’m posting from my phone which probably isn’t helping any.
  11. Stock file needed; 2010 cts-v e67 + t43

    I'm looking for a stock file that wasn't in DROPBOX.

    E67 = 12635947

    T43 = 24249179

    2010 CTS-V 6L90E

    Thank you.
  12. Replies
    2
    Views
    886

    23065 I don't know what OS you need. But here...

    23065

    I don't know what OS you need. But here is one I have.
  13. Replies
    1
    Views
    902

    E38 - t43 - speedometer error

    I could use a sanity check here...

    I have a customer with a 2009 GM 1500. He installed a lift kit with 35" tires and 4.56 gears.
    I have tried to adjust the speedometer being 6mph off and I have...
  14. I wouldn’t fully shut off the TQ management. ...

    I wouldn’t fully shut off the TQ management. Just reduce it.
    Tuning the trans shift behavior is in the ECU

    Post up your file. You probably have some nannies still turned on in the ECU.
  15. Replies
    11
    Views
    4,288

    Don

    Don
  16. Replies
    8
    Views
    2,596

    22716

    22716
  17. Replies
    8
    Views
    2,596

    2014 Stingray A6 It has the same engine. I...

    2014 Stingray A6
    It has the same engine.

    I was tuning a Whipple Silverado. So I started with some car settings to see if I could liven it up a bit. Then I modified it further from there. ...
  18. Replies
    8
    Views
    2,596

    What I have noticed is that when I DON'T turn...

    What I have noticed is that when I DON'T turn this table up. the throttle blade closes to maintain the factory TQ rating.
    So I always tune this to go up above what the power of the car is making....
  19. Replies
    3
    Views
    1,210

    I've seen this table and wondered the same thing....

    I've seen this table and wondered the same thing.
    What I would "assume" is that it would help at low RPM (similar to an MSD setup). Maybe with a cam? To help with idle.

    I have not turned...
  20. Replies
    1
    Views
    740

    E92 - mech t-stat setting - limp mode

    I have a customer that has a 2014 Stingray.
    I tuned this car over the summer. Well, he drove it a few times in the winter during some nice weather and he's been going into "limp mode".
    After...
  21. Replies
    8
    Views
    2,749

    Nice! Glad it was solved.

    Nice! Glad it was solved.
  22. Replies
    8
    Views
    2,749

    So, you can read the calibration file with zero...

    So, you can read the calibration file with zero issues?
    But can’t flash it...

    Does the error come up as soon as you start the flash?
  23. Replies
    8
    Views
    2,749

    I haven't looked at your file, but did you...

    I haven't looked at your file, but did you experience a voltage drop during the flash?

    I've bought a new Snap-On battery charger for myself with a nice "flash reprogram" setting on it that will...
  24. The stock file was from DropBox. I never had...

    The stock file was from DropBox.
    I never had this cars stock file as it came to me modded.

    But good news, I did just drill a 4mm hole in it and I can see that it made a HUGE difference.

    I'm...
  25. I did not! Unfortunately, I didn't "Pull" what...

    I did not!
    Unfortunately, I didn't "Pull" what the dealership flashed into the ECU.
Results 1 to 25 of 27
Page 1 of 2 1 2