alot of it has to do with driving style. i'm getting 10 more MPG out of my cavalier by shifting at 2000.
Type: Posts; User: yellowC6ohio; Keyword(s):
alot of it has to do with driving style. i'm getting 10 more MPG out of my cavalier by shifting at 2000.
From what i have found it wont save the map if the map is in a different folder other then the main EFILive folder.
how do you go about getting the seed/key info?
can they be found using GM dealer tools like the tech 2 or MDI or one of their other scaning / diagnostic tools?
:doh2:
lol, thats what i get for posting before thinking..
THANKS
here is the difference in LTFT between kPa and LOAD
http://forum.efilive.com/attachment.php?attachmentid=3732&stc=1&d=1218730617
...
ok i was logging a cobalt and decided to log some PIDs that say they are not supported just out of curiosity and some of them appear to work.
has anyone else had any luck with these or can...
I was looking over a 2007 Cobalt SS tune file and i found this
Operating system patch
This patch will extend the VE table range up to 255kPa (21PSI).
ok well 255kPa = 36.9psi
so i just...
i have been unable to connect to my wideband so i just used the same
.88333 V at 5 AFR
4.21667 V at 15 AFR
that it was already programmed for
the formula i came up with is
(Voltage *...
why is the cylinder volume in the E40 708.2cc that is the exact same as LS1 and LS6. it should be 746.48cc (4 inch bore 3.625 stroke)
What tables or calculations are effected by this number?
i was messing around with EFILIve one night and found this
http://i32.tinypic.com/24b9qic.jpg
i set to 1500 to take the pic.
just thought i'd share it since i have never heard of anyone...
i have been working hard on some of the math and i think i may have the formula to show e85 AFR.
setting up the wideband using the
.88333 V at 5 AFR
4.21667 V at 15 AFR
the formula i came...
are you saying (voltage + 7.5)/10 will give you the EQ Ratio?
because i'm not getting the right answers.
and if this is going to be used for all fuels i think it's going to need altered because...
anyone know the proper setting to setup the LC1 for e85
? volts at ? AFR
and do you know what the voltage to AFR calculation should be changed to in the generic.sae folder.
it's the E40 LS2 and none of them worked except the wideband.
i went back and looked at my PID selection and there were 36 channels i think what happened is i accidentally saved it with to many...
ok i tried it again just now and it didn't work with the PID selections i always use but i tried another PID selection file and it worked. i'm not sure what caused the problem but i'll have to look...
last night my scan tool stopped working properly
i can upload tunes fine but when i started to scan nothing showed except for the wideband reading. i tried unplugging the box from all possible...
What are the LS2 33lb injectors rated at I have heard 43.5 and 58 psi
even then the values given by the calculator are way off compared to the stock numbers
if I set the calculator to show the...
try selecting different PIDs. sometimes mine wont connect at all if a certain PID is selected, it took me forever to figure out thats what was causing the problem. unfortunately i can't remember...
Awesome